Abstract:In this work, the intentional insertion of slots in metal gate (MG) is introduced to solve the dishing issue for the double-diffused drain MOSFET (DDDMOSFET) fabrication. For traditional DDDMOSFET, the gate oxide layer in slots will be reserved to improve the device reliability, which requires an additional photomask to screen the gate/slot regions during the following sidewall formation and source/drain (S/D) implantation. This makes the process more complicated with increased cost. Without that additional photomask, it is proposed that the removal of gate oxide layer in slots can directly allow the floating S/D formation and the followed Ni silicidation there. It is demonstrated that such a novel process can not only relieve the MG dishing issue but can also effectively result in ~16% higher ON current and comparable OFF current for both N- and P-DDDMOSFETs without threshold voltage shift after applying electrical stress on gates. It is also revealed that the floating silicided S/Ds in slots have negligible influence on device breakdown characteristics. By saving one photomask, this work proposes a novel solution for the effective integration of core devices with very small feature sizes and high-voltage (HV) devices with large feature sizes in the same die, which is a common challenge for display driver chip fabrication using high- ${k}$ /MG (HK/MG) technology.

A novel asymmetric graded low doped drain (AGLDD) vertical channel nMOSFET with sidewall masked (SWAM) LOCOS isolation

High Frequency InGaAs MOSFET with Nitride Sidewall Design for Low Power Application.

Fabrication Of 32 Nm Vertical Nmosfets With Asymmetric Graded Lightly Doped Drain Structure

A novel heavily doped drift - auxiliary cathode lateral insulated gate transistor structure

A Novel Low Channel Resistance LDMOS with Planar and Trench Gates

A Viable Self-aligned Bottom-Gate MOSFET Technology for High Density and Low Voltage SRAM

Asymmetric gate (AG) FET: a novel sub-micron MOS device structure with excellent performance

An N-channel Graded-Junction Lateral Diffused MOS Transistor in 0.18&#x03bc;m Low-Power Logic CMOS Process

Asymmetric, Gate (Ag) Mos Device: A Novel Field Effect Transister (Fet) Structure

A Novel High Voltage Ultra-Thin SOI-LDMOS with Sectional Linearly Doped Drift Region

DDDMOSFET Performance Improvement by Gate Oxide Removal Followed by Silicided Source/Drain Formation in Gate Slots

A Novel Self-Aligned Dopant-Segregated Schottky Tunnel-FET with Asymmetry Sidewall Based on Standard CMOS Technology

Slop-Ldmos - A Novel Super-Junction Concept Ldmos And Its Experimental Demonstration

Source/Drain Architecture Design of Vertical Channel Nanowire Fet for Sub-10nm Node

A novel MOSFET with lateral-vertical charge coupling for extremely low C gd

Implementation of Fully Self-Aligned Bottom-Gate MOS Transistor

Mechanisms and Characteristics of a Low-Loss Split Gate Trench MOSFET with Shield Layer

High-Voltage SOI Deep Trench LDMOS with Quasi Vertical Super Junction Structure

Novel STI scheme and layout design to suppress the kink effect in LDMOS transistors

Fabrication and characterization of groove-gate MOSFETs based on a self-aligned CMOS process

Gate-Recessed Normally OFF GaN MOSHEMT With High-Temperature Oxidation/Wet Etching Using LPCVD Si3N4 as the Mask