Abstract:The aim of the present paper is to review our work on plasma‐surface interactions during the etching of silicon gates in low pressure high density HBr/Cl2/O2 based plasmas. In integrated circuit manufacturing, the transfer of patterns onto the polysilicon layer relies on the formation of a passivation layer on sidewalls of the etched features, which protects the silicon gate sidewall fromisotropic etching. At the same time, a layer with an almost identical chemical composition is also deposited on the reactor walls and can modify the process parameters by changing the radicals' surface loss probability. In this work we use a new “plasma etching‐sputtering” diagnostic technique, involving a subsequent “mild etching” of the layer deposited on the chamber walls by a few % SF6‐containing Ar plasma. Thus we investigate the chemical composition of this layer. This chemical composition is deduced from the time variation of the gas phase concentration of different atoms and radicals, the etch products of the wall deposited layer, monitored during the “mild etching” of the layer by time‐resolved optical emission spectroscopy and mass spectrometry. Optical absorption spectroscopy and mass spectrometry have been employed to characterize the HBr/Cl2/O2 plasma, currently used for the gate etching, and to estimate the absolute flux of neutral and ionic deposition precursors reaching the reactor walls. It comes out that the silicon wafer etch byproducts, SiClx radicals (x < 2) and SiOyCl+x ions, are the main depositing agents. Finally, the chemical topography analysis method, based on the X‐ray photoelectron spectroscopy, has been used to determine the chemical composition of the layer formed on the sidewalls of the silicon etched features. We show that the layers deposited on the sidewalls and on the chamber walls are both silicon oxyhalogenides (SiOyClx) compounds, formed by the subsequent oxidation of the deposited silicon chloride etching by‐products. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

Influence of Etching Parameters on Sidewall Roughness of Silicon Based Waveguide Etched by Inductively Coupled Plasma

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Improvement of ICP etching process for reducing the surface roughness of SiO2 optical waveguides

Rib and strip chalcogenide waveguides based on Ge-Sb-Se radio-frequency sputtered films

Fabrication of single-mode ridge SU-8 waveguides based on inductively coupled plasma etching

Fabrication of GaN‐based Ridge Waveguides with Very Smooth and Vertical Sidewalls by Combined Plasma Dry Etching and Wet Chemical Etching

Effect of process parameters on sidewall damage in deep silicon etch

Microscale pattern etch of 4H–SiC by inductively coupled plasma

Optimized Inductively Coupled Plasma Etching for Poly(Methyl-Methacrylate-Glycidly-Methacrylate) Optical Waveguide

Optimizing the flatness of 4H-silicon carbide wafers by tuning the sequence of lapping

A study on the etching characteristics of atmospheric pressure plasma for single-crystal silicon wafer

Laser Annealing of SiO2 Film Deposited by ICPECVD for Fabrication of Silicon Based Low Loss Waveguide

Study of Silicon-on-glass Waveguides

Correlation and Interaction between Sidewall Passivation and Chamber Walls Deposition During Silicon Gate Etching

Polarization characteristics of shallow-etched SOI ridge waveguide with non-rectangular cross section

Etching Quartz with Inductively Coupled Plasma Etching Equipment

Effects of deep reactive ion etching parameters on etching rate and surface morphology in extremely deep silicon etch process with high aspect ratio

Gan-Based Ridge Waveguides With Very Smooth And Vertical Sidewalls By Icp Dry Etching And Chemical Etching

Study of the Nanometer Scale Polysilicon Micro Structure Etching

Etching Characteristics of PECVD SiC

REACTION SIMULATION AND EXPERIMENT OF A Cl2/Ar INDUCTIVELY COUPLED PLASMA FOR ETCHING OF SILICON