Abstract:Accurate calculation of the heat source in the roll gap during the cold rolling process is the basis for a well-designed coolant system, which is particularly important for reducing roll wear and improving the flatness quality of strip steel. Although many established numerical models have high precision when calculating the work roll temperature, complex modeling processes and large calculation times result in the inability to predict the work roll temperature quickly for the application of automatic control systems. Therefore, the authors developed a new analytical heat source model to calculate the axial temperature distribution of the work roll in the cold rolling process. First, according to the deformation characteristics of strip cold rolling, the deformation zone is divided into a plastic zone and two elastic zones, and the length of each deformation zone is calculated considering the effect of tension. Then, the friction heat generated in the elastic zone is calculated. Second, new exponential velocity and corresponding strain-rate fields satisfying kinematically admissible conditions are proposed to calculate the deformation heat and friction heat generated in the plastic zone. Finally, the work roll temperature prediction model is established by contemplating the heat source of the roll gap, emulsion heat transfer, air cooling, and contact heat transfer with the intermediate roll. By repeatedly optimizing the weighted coefficient d of intermediate principal shear stress on the yield criterion, the maximum error between the calculated results and the actual measured cold roll temperature data was reduced to 3.1%. The effects of the reduction ratio, rolling speed, and resistance to deformation on the deformation heat and friction heat are discussed, and the variation of temperature field of the work roll with time is analyzed quantitatively.

ACCURATE AND FAST SIMULATION OF ROLLING FORCE MODEL IN COLD STRIP ROLLING

Tri-dimensional Elastic-Plastic Fem of Rolling Force During Strip Finishing Rolling Process

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

STUDY OF ROLLING FORCE MODEL ON HOT STRIP MILL

A fast calculation method of large-cylinder asymmetrical rolling force considering shear effect

An analytical model of plate rolling force with a simple available velocity field and equal perimeter yield criterion

Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion

Theoretical Study of Asymmetric Bending Force on Metal Deformation in Cold Rolling

Surface rolling FE model for numerical simulation

Influence of rolling force optimization on thickness accuracy of 20-high cold-rolling mill of silicon steel

An improved method for calculating roll deformation of six-high rolling mill: enhances computation speed and accuracy

Deduction of a quadratic velocity field and its application to rolling force of extra-thick plate

A robust model for rolling of thin strip and foil

Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

A Semi-Empirical Friction Model for Cold Metal Rolling

Numerical Analysis on Flatness Adjusting Performance of Hot Wide Strip Temper Mill with Small-Diameter Work Rolls

Careful finite element simulations of cold rolling with accurate through-thickness resolution and prediction of residual stress

Numerical Simulation of Elastic Deformation of Roller Based on Thermo-Mechanical Coupling

Rolling Process Analysis of Working Rollers of Cold Rolling Mill Based on ANSYS

Numerical Simulation and Parameter Design of Strip Cold Rolling Process of 301L Stainless Steel in 20-Roll Mill