Abstract:The method is aimed at comparing the lubricating capacity of different emulsions. The purpose of the work is to evaluate the possibility of using a universal friction machine, type MMW-1A, to determine the value of the friction coefficient in the cold rolling of very thin strips of carbon steel. The article analyzes the research related to the methods of measuring the friction coefficient in lengthwise rolling. The methodology of experiment determination of friction coefficient value between the material of RCM-1250 reversing mill rolls (steel of working rolls—analog of 60S2HFA steel) and the sample of annealed strip, 0.224-mm thick, made of TS-435 steel grade (analog of 08ps steel, GOST 1050) has been developed. The selected friction conditions are semi-fluid friction. The experiment applied the emulsion, based on the lubricating-cooling liquid, such as Quaker 2185, and used an RCM-125 reversing mill. Two types of ring-shaped samples made of roll material were used in the experiment with wall thicknesses of S = 4 mm and S = 2 mm. The results of the experiments showed that the use of the ring-shaped sample with S = 4 mm is more reasonable from the point of view of stability of the created friction conditions. The recommended average value of friction coefficient between the above materials of rolls and strip was determined: f cf = 0.038. In the course of the experiment the values of the friction coefficient fluctuated within the boundaries, from the minimum of f min = 0.012, to the maximum of f max = 0.048. In general, these experimental results are correlated with reference data on the value of the friction coefficient for this type of rolling and the results of other experiments described in the literature, conducted under similar friction conditions. Proceeding from this, it is possible to draw a conclusion that estimation of the lubricating capacity of various lubricating-cooling liquids, application of universal friction machines of the design described in the article is expedient.

A Semi-Empirical Friction Model for Cold Metal Rolling

A Multi-Scale Model for Friction in Cold Rolling of Aluminium Alloy

A Friction Model for Cold Strip Rolling with Two-Wavelength Surface Roughness in the "mixed" Lubrication Regime

Rolling of Thin Strip and Foil: Application of a Tribological Model for “mixed” Lubrication

A Two-Wavelength Model of Surface Flattening in Cold Metal Rolling with Mixed Lubrication

A Friction Evaluation Method Based on Barrel Compression Test

An Efficient Multi-Scale Modeling Method that Reveals Coupled Effects Between Surface Roughness and Roll-Stack Deformation in Cold Sheet Rolling

Measurements of Surface Roughness in Cold Metal Rolling in the Mixed Lubrication Regime

A Realistic Friction Model for Computer Simulation of Sheet Metal Forming Processes

A robust model for rolling of thin strip and foil

Modeling of the Friction Behavior in Metal Forming Process Considering Material Hardening and Junction Growth

An analytical model of plate rolling force with a simple available velocity field and equal perimeter yield criterion

Through-Thickness Modelling of Metal Rolling using Multiple-Scale Asymptotics

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

Measurements of friction in strip drawing under thin film lubrication

Method for Determination of the Friction Coefficient during Cold Rolling of Extra Thin Sheets

On the interest of a semi-empirical model for the tooth friction coefficient in gear transmissions

The Friction and Wear Model of Steels and Their Probable Statistic Calculations

A semi-analytical model for the scale-dependent friction of nanosized asperity

Analysis and Prospects of Lubrication and Friction Characteristics in Cold Strip Rolling: A Review

A Simplified Model of Surface Burnishing and Friction in Repeated Make-Up Process of Premium Tubular Connections