Abstract:Simulations and experimental methods were used to evaluate the performance of notched vortex finders in a cyclone separator with a tangential inlet. The vortex finder was cut obliquely. Four types of cyclone separators with different vortex finder structures were studied. One of the separators did not have a cut at the vortex finder, while the other separators had cuts located at 45°, 135°, and 225° opposite to the inlet of the separator. An unsteady Reynolds stress transport model (RSM) was implemented for the gas-phase flow field, and a discrete phase model (DPM) was adopted for the particle phase. Considering the asymmetric flow field in the separator with a tangential inlet, the distribution of axial velocity, tangential velocity, and radial velocity along the circumference were discussed, and the effect of the notched vortex finder on the flow field in the separator was shown in detail. The grade efficiencies of the four models were compared. The simulation results show that the separation performances of the cyclone separators with notched vortex finders were greatly improved over the separation performance of the original separator. When the cut position was located 225° opposite to the inlet, the separation performance of the cyclone separator improved most obviously. Experiments were carried out to confirm the advantages of notched vortex finders. The experimental results show that a separator with a notched vortex finder at 225° can remove particles greater than 3.5μm in diameter, while a normal separator can remove only particles greater than 8μm in diameter. Furthermore, the total separation efficiency of the original separator is 0.73, while the total separation efficiency of the improved separator is 0.76.

Experimental study on a new type of cyclone separator for fine particles

Performance Evaluation of a New Micro Gas Cyclone Using Simulation and Experimental Studies to Capture Indoor Fine Particles

EXperimetal Study on the Diffusion Square Cyclone Seoarator

Micro Gas Cyclone Design and Performance Evaluation to Collect Dust Particles

Experimental research of the flow field by using PDA in a new cyclone-type separator

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Experimental Research on Separation Performance for Square Cyclone Separator under Different Constructional Details

AN EXPERIMENTAL STUDY ON THE GAS-SOLID TWO-PHASE FLOW IN A SQUARE CYCLONE SEPARATOR WITH DOWNWARD GAS EXIT BY 3D-PDA

Experimental Research on Square Cyclone

Performance Evaluation of a New Cyclone Separator – Part I Experimental Results

Research on high-efficiency cyclone separators and their optimum design

Experimental and Computational Analysis of a Cyclone Separator with a Novel Vortex Finder

Effect of Inlet Area on the Performance of a Two-Stage Cyclone Separator

Structure and Performance of the Circumfluent Cyclone

Experimental study on the separation performance of a novel oil–gas cyclone separator

Effect of Inlet Air Volumetric Flow Rate on the Performance of a Two-Stage Cyclone Separator

An Experimental Study of the Structural Optimization of Square Shaped Cyclone Separators

Experimental study on the gas-solid two-phase flow in a square cyclone separator with downward gas exit by particle dynamic analyzer

Experimental and Numerical Studies on a New Double-Stage Tandem Nesting Cyclone

Experimental and CFD investigation on effects of internals on the flow pattern and performance of a divergent cyclone separator

Experimental investigation on separation characteristics of axial cyclone separator