Effect of Inlet Area on the Performance of a Two-Stage Cyclone Separator

Jihe Chen,Zhongan Jiang,Bin Yang,Yapeng Wang,Fabin Zeng

DOI: https://doi.org/10.1016/j.cjche.2021.06.003

IF: 3.8

2021-01-01

Chinese Journal of Chemical Engineering

Abstract:The cyclone separator is an important separation device. This paper presents a new type of embedded two-stage cyclone, which includes a 2 nd-stage cyclone(internal traditional cyclone) with multiple inlets and a 1 st-stage cyclone(outer cylinder) that unifies the 2 nd-stage cyclone inlets into one inlet. The Taguchi experimental method was used to study the two-stage cyclone separator’s inlet area on its performance. Studies have shown that the increase of the 1 st-stage cyclone inlet area and the increase in the number of 2 nd-stage cyclone inlets(N) positively affect reducing the pressure drop and a negative effect on efficiency. It is recommended to use 2 S(the original 1 st-stage cyclone inlet area) of the 1 st-stage cyclone inlet area and 2 N of the 2 nd-stage cyclone inlets when separating fine particles. Compared with a traditional cyclone, the pressure drop is reduced by 1303 Pa, the mass separation efficiency(Eq) is increased by 0.56%, and the number separation efficiency(En) is increased by 2.05%. When separating larger particles, it is recommended to use 2 S of the 1 st-stage cyclone inlet area and 4 N of the 2 nd-stage cyclone inlets. Compared with a traditional cyclone, although Endecreases slightly, the pressure drop is reduced by 3055 Pa, and the Eqis increased by 0.56%. The research results provide new insight into the design of the cyclone.