Abstract:A low- or room-temperature bonding method was developed for fabrication of glass-based microfluidic chips without the requirement of clean environment and programmed high-temperature furnaces. After fundamental pretreatments, the glass substrates and cover plates to be bonded were sequentially soaked in concentrated sulfuric acid, washed with high-flow-rate tap water, de-ionized water and treated using HF steam as a necessary step. Finally, the plates were bonded by bringing the cleaned surfaces into close contact either under a continuous flow of de-ionized water or directly when treated with HF steam, and annealing at low-temperature (<100°C) or room-temperature. With the key improvements such as fabrication process optimization, gridding channel design and HF steam treatment, the glass-based chips could be obtained with fast, easy and high bonding yields (>90%). The bonding quality of the chips was evaluated by employing SEM, shear strength testing procedure and electric current measurement at different applied voltages. The mechanism for the strong bonding strength was presumably related to the formation of a hydrolyzed layer on the glass plate surfaces after soaking them in acid or water for extended periods. Microfluidic chips bonded by the above method were evaluated in the CE separation of monofuctional reactive dye Cy5-labeled bioamines.

Fabrication And Characters Of Organic Polymer Fluidic Microchip

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Research on Nano-Imprint Microfabrication and Bonding of Polymer Microfluidic Chips

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

Design and fabrication of microflow total chemical analysis system byorganic polymer

Experimental Study on the Hot Embossing Polymer Microfluidic Chip

The Process of Automatically Fabricating Polymer Microfluidic Chips

Fabrication Of Microfluidic Chip And Its Application

A Simplified Microfabrication Technology For Production Of Glass Microfluidic Chips

Fabrication of microfluidic chip and its electrical property

Method For Fabrication Of Microfluidic Glass Chips

Novel Fabrication Technology Of Polydimethylsiloxane Microfluidic Chip

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Micro Etching Method Inside Microchannels

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Fabrication of a Thermoplastic Multilayer Microfluidic Chip

Study on a Practical Fabrication of Glass Microfluidic Chip

Study on a Low-Cost and Fast Fabrication Method of Glass Microfluidic Chips