Abstract:The present study investigated the microstructure, phase transformation behavior, and functional characteristics of the multicomponent Ti–Ni–Cu–Al–V shape memory alloys with the different annealing treatments. The results indicated that the multicomponent Ti–Ni–Cu–Al–V alloy annealed at 673 K/5 min was primarily composed of the B2 parent phase and Ti2(Ni,Cu) type precipitates distributing along the grain boundaries. As the annealing temperature increased and the annealing time extended, the chemical composition of the matrix changed slightly due to the precipitation of the Ti2(Ni,Cu) phase. Consequently, the martensitic phase (B19) gradually appeared and the volume friction of the martensite phase gradually increased. The phase constituents of the present Ti–Ni–Cu–Al–V shape memory alloy evolved from a B2 austenite phase to a B19 martensite phase with the annealing temperature/time increasing. Additionally, as the annealing temperature and time increased, the grain size also increased. The increment in annealing temperature and the prolongation of annealing time resulted in an increase of martensitic transformation temperatures as a result of the comprehensive effect of chemical composition, grain size, defects’ density, etc. Both yield strength and fracture strength decreased, while the elongation significantly increased (reaching 28% at 1123 K/60 min) with the annealing temperature rising and annealing time prolonging. Under the successively applied prestrain to 8% condition, the recoverable strain decreased from 4.2% to 1.7% for the annealed Ti–Ni–Cu–Al–V shape memory alloy with the annealing temperature/time increasing.

Microstructures and Transformation Characteristics of Thin Films of Tinicu Shape Memory Alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Evolution of Surface Morphology in Tinicu Shape Memory Thin Films

Transformation Hysteresis and Shape Memory Effect of an Ultrafine-Grained Tininb Shape Memory Alloy

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

Influence of Nb Content on Martensitic Transformation and Mechanical Properties of Tinicunb Shape Memory Alloys

Microstructure and phase transformation of TiNi alloy with addition of third element Sn

Martensitic Transformation and Magnetic Properties of Ti-doped NiCoMnSn Shape Memory Alloy

Irradiation-Induced Changes of Martensitic Transformation Temperatures in A Tininb Shape Memory Alloy

Effect of Heating/Cooling Rate on the Transformation Temperatures in Tinicu Shape Memory Alloys

Microstructure Evolution and Crystallography of the Phase-Change Material TiSbTe Films Annealed in Situ

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

In-Situ Tem Study of the Thickness Impact on the Crystallization Features of A Near Equal-Atomic Tini Thin Film Prepared by Planar Magnetron Sputtering

The Behavior of Crystalline Grain Growth in TiNi Shape Memory Alloy Thin Films

Microstructure and Transformation Temperatures in Rapid Solidified Ni–Ti Alloys. Part II: the Effect of Copper Addition

Microstructure and Martensitic Transformation of NiTiHfSc High Temperature Shape Memory Alloys

In-situ Synchrotron X-ray Diffraction Study of Stress-Induced Phase Transformation in Ti50.1Ni40.8Cu9.1 Thin Films

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

EXPERIMENTAL INVESTIGATION ON THE STRESS-INDUCED MARTENSITIC TRANSFORMATION AND THE MICROSTRUCTURE EVOLUTION IN CuAlNi SINGLE CRYSTAL

Effect of Cu content on martensitic transformation and shape memory behavior in Ti31.5Hf15Zr5Ni48.5−xCux alloys