Abstract:Martensitic transformation (MT), strain glass transition (SGT) and the corresponding stress-strain responses in cold-rolled Ti49.2Ni50.8 shape memory alloys (SMAs) at various amounts of cold-rolling deformation are investigated. A phase diagram describing all the strain states and transitions among them is established in the temperature – deformation space. It shows a normal sharp, strong first-order B2 to B19′ MT at low deformation levels (cold-rolling thickness reduction εp < 27%), but a continuous B2 to B19′ SGT at high deformation levels (εp ≥ 27%) upon cooling. Superelasticity with small hysteresis, tunable modulus and functional-fatigue resistance properties are achieved by altering the transition behavior from MT to SGT at εp ≥ 27%. Nanodomains of single variant B19′ martensite at the atomic scale are observed by using aberration-corrected scanning transmission electron microscopy in samples with εp = 27%. Further in-situ loading synchrotron-based high energy X-ray diffraction technique shows that the quasi-linear superelasticity associated with the SGT can be attributed to stress-induced continuous growth of B19′ nanodomains. Geometrical phase analysis of high-resolution transmission electron microscopy image reveals a nanoscale network of severe lattice distortion associated with the accumulated high-density of defects at εp ≥ 27%, which is the microstructural origin of the B19′ strain glass state. This work provides a detailed explanation for the long-standing puzzle of unique quasi-linear superelastic response in plastically deformed TiNi SMAs, and may shed light on achieving novel mechanical properties through defect engineering.

Evolution of Surface Morphology in Tinicu Shape Memory Thin Films

In-situ observation of transition between surface relief and wrinkling in thin film shape memory alloys.

Study On Surface Relief Of Tinicu Thin Films

Microstructures and Transformation Characteristics of Thin Films of Tinicu Shape Memory Alloy

Phase Transformation Behavior of TiNi Based Shape Memory Alloy Films

Nano-Scale Surface Morphology Evolution of Cu/Ti Thin Films

On the Lower Thickness Boundary of Sputtered Tini Films for Shape Memory Application

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Tailoring of Microstructure and Martensitic Transformation of Nanocrystalline Ti–Ni-Hf Shape Memory Thin Film

The Microstructure of Ti-Ni-Cu Shape Memory Thin Films: a Review

Deposition and Phase Transformation Behaviors of Ti–Ni-Hf-Cu Quaternary Shape Memory Alloy Thin Films

Residual Stress Of Tini Shape Memory Alloy Thin Films On Silicon Substrate

Surface Configurations During Annealing of Sputter-Deposited NiTi Thin Films

Structure of martensite in deformed Ti–Ni–Cu thin films

Deformation mechanisms in a TiNi shape memory alloy during cyclic loading

Effects of Aging on the Characteristics of TiNiPd Shape Memory Alloy Thin Films

Strain states and unique properties in cold-rolled TiNi shape memory alloys

From Strain Softening to Strain Hardening in Submicron Scale Ti2448 Associated with Slip Mode Transition Mediated by Nanoscale Martensitic Transformation

In Situ Synchrotron X-ray Diffraction Analysis of Deformation Behaviour in Ti-Ni-based Thin Films.