Abstract:dA grafting technique was proposed for the preparation of polymer monolayer on polymeric substrate. On the basis of our recent work on polymer-supported inhibitor (PSI), hydroquinone (HQ) was first implanted onto polypropylene (PP) surface through UV-initiated grafting. The resulting immobilized HQ was used as PSI for the thermal-induced free radical polymerization (FRP) of acrylic acid (AA). The inhibition mechanism was similar to that of free HQ molecule, that is, polymer chain-carrying radical or peroxy radical could be deactivated by abstracting hydrogen atom from hydroxyl group of immobilized HQ, and the resulting oxyradical (semiquinone radical) combined with another active chain free radical. According to this mechanism, a devised redox initiator consisting of sodium hydrogen sulfite and ammonium persulfate was used to initiate FRP of AA in water at low temperature (50 degrees C). High crystalline biaxial oriented PP film with HQ immobilized was deliberately laid in this system as a radical trap to capture poly(acrylic acid) (PAA) short chain radical. Through X-ray photoelectron spectra (XPS) analysis it was found that the atom ratio of C-HQ (carbon in HQ) to C-COOH (carbon in COOH) decreased with prolonging polymerization time and became stable after about 30 min. The formed PAA short chain on the surface showed a distribution of monolayer, and the saturated thickness was calculated as 5-7 angstrom. The degree of polymerization of gaft chain in PAA monolayer was estimated as 15-20 through three different models. Relating to surface coverage being 100% in ideal densely packed PAA monolayer, real monolayer surface coverage in such reaction system was estimated as 12.3-18.5%. This method was expected to give us a general approach for constructing kinds of graft polymer monolayer on polymeric substrate, because the involved chemistry was only common inhibition reaction between immobilized inhibitor (HQ) and FRP system in solution (herein redox initiating system of AA). We named this grafting chemistry as confined surface inhibition reaction. (c) 2007 Wiley Periodicals, Inc.

Study on Surface Grafting Polymerization of Cpp/Aa System with Two-Step Method

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Grafting Mechanisms in Hybrid Miniemulsion Polymerization

Surface Grafting Polymerization of Acrylonitrile Onto Polypropylene Film

Graft Modification of Chlorinated Polypropylene and Coating Performance Promotion for Polypropylene

Preparation of Temperature-Sensitive Polymer Films by Surface Photografting Techniques

Surface Graft Polymerization of Binary Monomers Maleic Anhydride/ n -Butyl Vinyl Ether on the Polypropylene Film via Two-Step Method

Surface Modification of Low-Density Polyethylene Films Via Photografting Polymerization Technique

Graft Copolymerization of Mixtures of Acrylic Acid and Acrylamide Onto Polypropylene Film

Photo-Induced Graft Polymerization of Acrylamide on Polypropylene Membrane Surface in the Presence of Dibenzyl Trithiocarbonate

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Two-step surface grafting of acrylic acid on low density polyethylene(LDPE) film initiated by fluorenone

Grafting Polymerization of Acrylic Acid Onto Preirradiated Polypropylene Fabric

Study on the Mechanism of Ldpe-Aa Vapor-Phase Photografting System

Grafting copolymerization of acrylamides onto preirradiated PP films

PHOTOGRAFTING OF HSS ON THE SURFACE OF LDPE FILM BY TWO STEPS

Covalently Attached Graft Polymer Monolayer on Organic Polymeric Substrate Via Confined Surface Inhibition Reaction

A Facile Method for Grafting Polymerisation of Acrylonitrile onto LDPE Film with High Grafting Efficiency

Surface Photografting Polymerization of Binary Monomers Maleic Anhydride and n -Butyl Vinyl Ether on Polypropylene Film I. Effects of Principal Factors

Study on the crosslinking features of LDPE-AA vapor-phase photografting system

Study on the surface grafting of polypropylene fibers