Abstract:A facile and environment friendly process, called water-solid phase suspension grafting polymerization, was developed to prepare polypropylene-g-poly(methyl methacrylate) (PP-g-PMMA) copolymer with a submicrometer microdomain. In this approach, graft polymerization was elaborately regulated to occur within micropores of polypropylene particles prepared by reactor granule technology. FTIR spectra of the samples after extraction demonstrated that PMMA was successfully grafted onto the PP. The results showed grafting percentage (GP) of PMMA increased with the increasing monomer ratios to PP and that could reach 13.6%. Whereas the grafting efficiency decreased as the monomer ratio increased. The addition of second monomer styrene improved GP up to 24.5%. Differential Scanning Calorimetry tests showed that the grafting of PMMA have a slight effect on the melting point and the relative crystallinity of PP. TEM micrographs demonstrated PMMA domains distributed in PP matrix with sizes ranging from about 100 to 300 nm. In addition, Shear viscosity increased with the growing GP indicated by rheological measurement. The preliminary evaluation showed PP-g-PMMA was effective in improving the compatibility of PP/acrylonitrile-styrene-acrylate blends. (c) 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Study on Polypropylene Powder Grafted with Acrylic Acid by Photo-Initiated Solid Phase Technique

PreparationProcess of PP Grafted with Acrylic Acid Modiifed Layered Double Hydroxide

Study of solid phase grafting MAA onto polypropylene

Supercritical Carbon Dioxide-Assisted Preparation of Polypropylene Grafted Acrylic Acid with High Grafted Content and Small Gel Percent

Study on the Graft Reaction of Poly(propylene) Fiber with Acrylic Acid

Study on Grafting Modifying Copolymerization of Polypropylene Melt-blown Nonwoven

A Facile Method to Prepare Polypropylene/poly(butyl Acrylate) Alloy Via Water–solid Phase Suspension Grafting Polymerization

Optimum Conditions of Grafting Copolymerization of Polypropylene Fiber with Acrylic Acid

Melt Grafting Of A Long-Chain Unsaturated Carboxylic Acid Onto Polypropylene

Synthesis and Characterization of Solid-Phase Graft Copolymer of Polypropylene with Styrene and Maleic Anhydride

Kinetics for Grafting of Acrylic Acid Onto Chlorinated Polypropylene

A Facile, Green, Versatile Protocol To Prepare Polypropylene-G-Poly(Methyl Methacrylate) Copolymer By Water-Solid Phase Suspension Grafting Polymerization Using The Surface Of Reactor Granule Technology Polypropylene Granules As Reaction Loci

Study on Crystallization Behavior of Solid-Phase Graft Copolymers of Polypropylene with Maleic Anhydride and Methyl Methacrylate

Study on Synthesis Process of Grafting of Acryl Amide onto Polypropylene Wax

Solid State Grafting Polymerization of Styrene and Ethyl Acrylate onto Polypropylene

Hydrophilic Modification of Recycled-Polypropylene

Solid‐phase Grafting of Hydroxymethyl Acrylamide Onto Polypropylene Through Pan Milling

Solid phase grafting of GMA and St onto polypropylene

Research Progress on Melt Grafting of Polypropylene