Abstract:Using a solvent-free radical grafting technique, glycidyl methacrylate (GMA) and maleic anhydride (MAH) were used as functionalized graft monomers, styrene (St) as a copolymer monomer, and grafted onto polylactic acid (PLA). A series of PLA-g-(GMA/MAH-co-St) graft copolymers were prepared by adjusting the GMA/MAH ratio. Subsequently, the prepared graft copolymers were used as a compatibilizer with PLA and polypropylene carbonate (PPC) for melt blending to prepare PLA/PPC/PLA-g-(GMA/MAH-co-St) blends. The effects of changes in the GMA/MAH ratio in the graft copolymer on the thermodynamics, rheology, optics, degradation performance, mechanical properties, and microstructure of the blend were studied. The results found that GMA, MAH, and St were successfully grafted onto PLA, and the PLA-g-(GMA/MAH-co-St) graft copolymer obtained from the reaction had a good toughening effect on the PLA/PPC blend system, which significantly improved the mechanical properties of the PLA/PPC/PLA-g-(GMA/MAH-co-St) blend without reducing its degradation performance, resulting in a biodegradable blend material with excellent comprehensive performance. In the PLA-g-(GMA/MAH-co-St) grafting reaction system, when GMA/MAH = 1.5/1.5 (w/w), the grafting degree of the graft copolymer increased most significantly, from 0.83 phr to 1.51 phr. This composition of graft copolymer can effectively improve the compatibility between PLA and PPC. The resulting PLA/PPC blend can maintain good melt flow properties (MFR of 14.51 g/10 min), high transparency, and low haze (light transmittance of 91.56 %, haze of 20.5 %), while significantly improving its thermal stability (T95%, Tmax, and Et increased by 12.87 °C, 20.33 °C, and 32.00 kJ/mol, respectively). Moreover, when introducing PLA-g-(GMA/MAH-co-St) (GMA/MAH = 1.5/1.5 (wt/wt)) graft copolymer into the system, the toughness of the PLA/PPC/PLA-g-(GMA/MAH-co-St) blend system is optimal, with the notch impact strength and fracture elongation increasing to 184.6 % and 535.4 % of the PLA/PPC blend, respectively, at which point the fracture surface of the impact sample shows a wrinkled fracture feature indicative of toughness.

A Facile Approach to Modify Polypropylene Flakes Combining O2-plasma Treatment and Graft Polymerization of L-lactic Acid

Direct Graft Polymerization of L-lactic Acid onto Oxidatively Functionalized Polypropylene Flakes

Grafting of Telechelic Poly(lactic‐co‐glycolic Acid) Onto O2 Plasma‐treated Polypropylene Flakes

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Photo-grafting Poly(acrylic Acid) Onto Poly(lactic Acid) Chains in Solution

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

A Facile, Green, Versatile Protocol To Prepare Polypropylene-G-Poly(Methyl Methacrylate) Copolymer By Water-Solid Phase Suspension Grafting Polymerization Using The Surface Of Reactor Granule Technology Polypropylene Granules As Reaction Loci

Timeliness of Cold Plasma Treatment on Surface Modification of Polylactic Acid Fibers

A Novel Method for Functionalization of Polypropylene with Oligomer of Glycidyl Methacrylate: Characterization of Copolymers

Improvement of PLLA Ductility by Blending with PVDF: Localization of Compatibilizers at Interface and Its Glycidyl Methacrylate Content Dependency

Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion

Surface Modification of Poly‐l‐lactide by Photografting of Hydrophilic Polymers Towards Improving Its Hydrophilicity

High-performance and functional fully bio-based polylactic acid/polypropylene carbonate blends by in situ multistep reaction-induced interfacial control

A Novel Approach for the Surface Modification of Polymeric Membrane with Phospholipid Polymer

Preparation, crystallization and thermo-oxygen degradation kinetics of poly(lactic acid)/fulvic acid-g-poly(isoprene) grafting polymer composites

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Plasma-induced Polymerization and Grafting of Acrylic Acid on the Polypropylene Nonwoven Fabric Using Pulsed Underwater Diaphragm Electrical Discharge

Surface Modification of Porous Polypropylene Membrane by PlasmaInitiated RAFT Graft Polymerization of Hydroxyethyl Methacrylate