Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Surface Modification of Porous Polypropylene Membrane by PlasmaInitiated RAFT Graft Polymerization of Hydroxyethyl Methacrylate

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Surface modification of PVDF porous membranes by electron irradiation

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators

Surface Modification of Microporous Polypropylene Membranes by Graft Polymerization of N,N-Dimethylaminoethyl Methacrylate

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside

Microporous polypropylene hollow fiber membrane Part I. Surface modification by the graft polymerization of acrylic acid

Development of a novel RAFT-UV grafting technique to modify polypropylene membrane used for NOM removal

Hydrophilic Modification of Hdpe Microfiltration Membrane by Corona-Induced Graft Polymerization

Improvement of the Antifouling Characteristics for Polypropylene Microporous Membranes by the Sequential Photoinduced Graft Polymerization of Acrylic Acid

Synthesis of an Amphiphilic Glucose‐carrying Graft Copolymer and Its Use for Membrane Surface Modification

Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

THE SURFACE TREATMENT OF POROUS POLYPROPYLENE MEMBRANE BY AR PLASMA WITH A LOW POWER

Surface Structure and Hydrophilicity of Polypropylene Porous Membranes Modified by Maleic Anhydride Plasma Polymerization