Abstract:The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm–1 K–1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm–1 K–1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish–kebabs," and hybrid Shish–kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.biomac.2c00067.DSC characterization, DMA characterization, rheological test characterization, FTIR characterization, and the relevant equations for calculating the crystallinity and thermal enhancement factor (PDF)This article has not yet been cited by other publications.

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Simultaneous Enhancement of Strength and Toughness of PLA Induced by Miscibility Variation with PVA.

Preparation, mechanical, and thermal properties of biodegradable polyesters/poly(lactic acid) blends

Introduction of Stereocomplex Crystallites of PLA for the Solid and Microcellular Poly(lactide)/poly(butylene Adipate-Co-terephthalate) Blends

Preparation Of Plasticized Poly (Lactic Acid) And Its Influence On The Properties Of Composite Materials

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites via Constructing Multioriented Microstructures

Novel Bioresource‐based Poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/poly(lacticacid) Blend Fibers with High Strength and Toughness Via Melt‐spinning

Efficient Fabrication of PLA/PHB Composites with Enhanced Mechanical Properties, Excellent Thermal Stability, Fast Crystallization Ability, and Degradation Rate Via the Synergistic of Weak Shear Field and Melt Quenching Technique

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Achieving All-Polylactide Fibers with Significantly Enhanced Heat Resistance and Tensile Strength Via in Situ Formation of Nanofibrilized Stereocomplex Polylactide

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology

Super-tough polylactic acid (PLA)/poly(butylene succinate) (PBS) materials prepared through reactive blending with epoxy-functionalized PMMA-GMA copolymer

Preparation, Structure and Performance of Poly(lactic Acid)/poly(lactic Acid)- Γ -Cyclodextrin Inclusion Complex-Poly(glycidyl Methacrylate) Composites

High Performance Polylactic Acid/thermoplastic Polyurethane Blends with In‐situ Fibrillated Morphology

Super-tough Poly (L-Lactide) Materials: Reactive Blending with Maleic Anhydride Grafted Starch and Poly (ethylene Glycol) Diacrylate

Constructing synergistically strengthening-toughening 3D network bundle structures by stereocomplex crystals for manufacturing high-performance thermoplastic polyurethane nanofibers reinforced poly(lactic acid) composites

A feasible strategy to balance the performance of stereo-complexed polylactide by incorporating poly(butylene adipate-co-terephthalate)

Highly Enhanced Mechanical, Thermal, and Crystallization Performance of PLA/PBS Composite by Glass Fiber Coupling Agent Modification

Manufacturing High-Performance Polylactide by Constructing 3D Network Crystalline Structure with Adding Self-Assembly Nucleator

Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodology