Abstract:The development of green and renewable materials has attracted increasing attention in recent years. Hence, biocomposite-based packaging materials have been investigated to replace petrochemical materials in several industries, such as the food packaging and electronics packaging industries. The tensile and thermal properties of biocomposite-based packaging materials composed of polylactic acid and plant fiber were mainly investigated in the current literature, but fewer studies on the improvement of water resistance and water vapor/oxygen barrier properties of composite materials were performed. Herein, we describe a composite film comprising TBFP [a mixture of bamboo fiber powder (BFP) and silica aerogel powder] that was combined with modified polylactic acid (MPLA) in a melt-mixing process. The structure, morphology, tensile strength, thermal properties, water absorption properties, water vapor/oxygen barrier effect, cytocompatibility, and biodegradability of the composites were characterized. MPLA and TBFP improved the properties of these composites. Fourier transform infrared and X-ray diffraction spectra have shown interfacial adhesion of MPLA/TBFP, resulting in a tighter structure. Hence, the MPLA/TBFP composite had higher elongation at failure (ε), tensile strength at failure (δ), Young's modulus (E), initial decomposition temperature at 5 wt % loss (T5%), residual yields, oxygen transmission rate, contact angles, lower thermal conductivity (k) values, water vapor transmission rate, and water absorption and biodegradability compared with PLA and PLA/BFP. It indicates that the MPLA/TBFP composites exhibited more favorable tensile strength, water resistance, and water vapor/oxygen barrier than the PLA and PLA/BFP composites. Cell growth analysis showed that the MPLA/TBFP and PLA/BFP composites own good cytocompatibility. Moreover, the biodegradability of the PLA/BFP and MPLA/TBFP composites increased with the filler (BFP or TBFP) concentration. Because of these improvements in their properties, composites can be used as packing materials in many perspectives.

Poly(l-lactide)/poly(d-lactide)/bamboo fiber (BF) bio-composites with enhanced heat resistance, mechanical and rheological performance

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Nonisothermal Crystallization Behavior of Biocomposites from Poly(lactic Acid) and Bamboo Fiber

In situ nanofibrillar fully-biobased poly (lactic acid)/poly (ethylene 2,5-furandicarboxylate) composites with promoted crystallization kinetics, mechanical properties, and heat resistance

Effect of Short Basalt Fibers on Durability, Mechanical Properties, and Thermal Properties of Polylactic Acid Composites

Preparation and Characterization of Polylactic Acid/Bamboo Fiber Composites.

Enhancing Thermal Stability and Tensile Performance of Short Basalt Fiber-Reinforced PLA Composites with PBAT and Nano-Silica

Interfacial interaction improvement of polylactic acid/bamboo-char biocomposites for high toughness, good strength, and excellent thermal stability

Development of polylactic acid‐untreated bamboo filler composite and its chemical and mechanical properties

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Effect of BF Mass Fraction on Properties of BF Reinforced Polylactic Acid Composites

Highly Enhanced Mechanical, Thermal, and Crystallization Performance of PLA/PBS Composite by Glass Fiber Coupling Agent Modification

Effect of oligomers from epoxidized soybean oil and sebacic acid on the toughness of polylactic acid /bamboo fiber composites