Abstract:The present work prepared poly(butyl acrylate) grafted CNW successfully via in situ polymerization, and observed that a co‐continuous phase between the PLA and CNW was formed which enhanced the interfacial adhesion and consequently contributed to an improvement in the thermal stability and mechanical strength of the PLA composites. Poly(butyl acrylate) (PBA) was grafted onto cellulose nanowhiskers (CNW) via transesterification in an ionic liquid and solution polymerization in water. Fourier‐transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, x‐ray photoelectron spectroscopy, and x‐ray diffraction were used to determine the structure and morphology of the PBA‐modified CNW (CNW‐g‐PBA). Poly(lactic acid) (PLA)/CNW‐g‐PBA nanocomposites were prepared by solution casting. The inclusion of CNW‐g‐PBA significantly increased the composite strength, toughness, and thermal stability. The maximum tensile strength and elongation‐at‐break values were approximately 28% and 268%, respectively, higher than those of PLA. The fracture surface showed typical ductile fracture characteristics. The glass‐transition temperature raised from 56.7 for PLA to 60.3°C for CNW‐g‐PBA (5 wt% PBA), and the crystallinity rose from 1.6% to 10.3%. These findings show that the modification of nanowhiskers increased their compatibility with, and dispersion in, PLA. These results show that a combination of surface‐functionalized CNWs and PLA provides biocomposites with a broad range of applications, for example, in packaging and biomedical products. Highlights CNW‐g‐PBA was prepared by transesterification and solution polymerization route. PLA/CNW‐g‐PBA exhibited strong and tough performance. Compatibility mechanism have been developed.

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

PLA toughened by bamboo cellulose nanowhiskers: Role of silane compatibilization on the PLA bionanocomposite properties

High-toughness PLA/Bamboo Cellulose Nanowhiskers Bionanocomposite, Strengthened with Silylated Ultrafine Bamboo-Char

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Surface modification of bamboo-char and its reinforcement in PLA biocomposites

Improvements in Compatibility and Properties of Biocomposites Modified Through Nanosilica Attachment

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Mechanical, Thermal, and Morphological Properties of PLA Biocomposites Toughened With Silylated Bamboo Cellulose Nanowhiskers

Improved performance of poly(lactic acid) nanocomposites with poly(butyl acrylate)‐modified cellulose nanowhiskers

Interfacial interaction improvement of polylactic acid/bamboo-char biocomposites for high toughness, good strength, and excellent thermal stability

Improving tensile strength and impact toughness of plasticized poly(lactic acid) biocomposites by incorporating nanofibrillated cellulose

Modified cellulose nanocrystals based on SI‐ATRP for enhancing interfacial compatibility and mechanical performance of biodegradable PLA / PBAT blend

Enhancing the mechanical properties of polylactic acid (PLA) composite films using Pueraria lobata root microcrystalline cellulose

Synthesis and investigation of sustainable long-chain branched poly(lactic acid-r-malic acid) copolymer as toughening agent for PLA blends

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

Enhancing Thermal Stability and Tensile Performance of Short Basalt Fiber-Reinforced PLA Composites with PBAT and Nano-Silica

Structure and Properties of Polylactic Acid Biocomposite Films Reinforced with Cellulose Nanofibrils

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film

Strengthening and flame retarding effect of bamboo fiber modified by silica aerogel on polylactic acid composites

Facile method to improve toughness and biodegradability of polylactide by modified CaCO3