Preparation, crystallization and thermo-oxygen degradation kinetics of poly(lactic acid)/fulvic acid-g-poly(isoprene) grafting polymer composites

Hao Zhang,Dawei Luo,Weijun Zhen
DOI: https://doi.org/10.1007/s00289-020-03498-5
IF: 2.843
2021-03-22
Polymer Bulletin
Abstract:In order to graft poly(isoprene) on the surface of fulvic acid (FA), fulvic acid-g-poly(isoprene) grafting polymer (FA-g-PI) was synthesized by reversible addition–fragmentation chain transfer polymerization. Because FA-g-PI became more hydrophobic, the static contact angle of FA-g-PI was 67°, which was increased by 37° compared with FA. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis showed that PI was grafted onto the FA. Furthermore, FA-g-PI was used as a modifier to melt blend with PLA to prepare poly(lactic acid)/fulvic acid-g-poly(isoprene) grafting copolymer composites (PLA/FA-g-PI). The mechanical performance results presented that the impact strength, tensile strength and elongation at break of PLA/FA-g-PI (0.3 wt%) reached 18.8 kJ/m2, 81.5 MPa and 18.47%, respectively, which were increased by 97.8%, 3.6% and 5.0% compared with PLA. The scanning electron microscopy analysis of impact fracture for PLA/FA-g-PI (0.3 wt%) also clearly showed that PLA/FA-g-PI (0.3 wt%) had the typical toughness fracture morphology feature. The results of differential scanning calorimetry and polarized optical microscope analysis indicated that the addition of FA-g-PI reduced the crystallite size during PLA crystallization. The kinetics of thermo-oxygen degradation by Kissinger method showed that the apparent activation energy of PLA/FA-g-PI (0.3 wt%) composites was increased from 153.73 kJ/mol to 179.17 kJ/mol, which was shown that FA-g-PI improved the thermal stability of PLA. Moreover, the reaction order showed that FA-g-PI had little effect on the PLA thermo-oxygen degradation reaction kinetic order under the air atmosphere.
polymer science
What problem does this paper attempt to address?