Abstract:The traditional approach toward improving the crystallization rate as well as the mechanical and barrier properties of poly(lactic acid) (PLA) is the incorporation of nanocelluloses (NCs). Unfortunately, little study has been focused on the influence of the differences in NC morphology and dimensions on the PLA property enhancement. Here, by HCOOH/HCl hydrolysis of lyocell fibers, microcrystalline cellulose (MCC), and ginger fibers, we unveil the preparation of cellulose nanospheres (CNS), rod-like cellulose nanocrystals (CNC), and cellulose nanofibers (CNF) with different aspect ratios, respectively. All the NC surfaces were chemically modified by Fischer esterification with hydrophobic formate groups to improve the NC dispersion in the PLA matrix. This study systematically compared CNS, CNC, and CNF as reinforcing agents to induce different kinds of heterogeneous nucleation and reinforce the effects on the properties of PLA. The incorporation of three NCs can greatly improve the PLA crystallization ability, thermal stability, and mechanical strength of nanocomposites. At the same NC loading level, the PLA/CNS showed the highest crystallinity (19.8 ± 0.4%) with a smaller spherulite size (33 ± 1.5 μm), indicating that CNS, with its high specific surface area, can induce a stronger heterogeneous nucleation effect on the PLA crystallization than CNC or CNF. Instead, compared to PLA, the PLA/CNF nanocomposites gave the largest Young's modulus increase of 350 %, due to the larger aspect ratio/rigidity of CNF and their interlocking or percolation network caused by filler-matrix interfacial bonds. Furthermore, taking these factors of hydrogen bonding interaction, increased crystallinity, and interfacial tortuosity into account, the PLA/CNC nanocomposite films showed the best barrier property against water vapor and lowest migration levels in two liquid food simulates (well below 60 mg kg-1 for required overall migration in packaging) than CNS- and CNF-based films. This comparative study was very beneficial for selecting reasonable nanocelluloses as nucleation/reinforcing agents in robust-barrier packaging biomaterials with outstanding mechanical and thermal performance.

Enhancing gas barrier performance of polylactic acid/lignin composite films through cooperative effect of compatibilization and nucleation

From Cellulose Nanospheres, Nanorods to Nanofibers: Various Aspect Ratio Induced Nucleation/Reinforcing Effects on Polylactic Acid for Robust-Barrier Food Packaging

Enhancing the Oxygen-Barrier Properties of Polylactide by Tailoring the Arrangement of Crystalline Lamellae

Improvement of the Gas Barrier Properties of PLA/OMMT Films by Regulating the Interlayer Spacing of OMMT and the Crystallinity of PLA

Highly Efficient “composite Barrier Wall” Consisting of Concentrated Graphene Oxide Nanosheets and Impermeable Crystalline Structure for Poly(lactic Acid) Nanocomposite Films

Super-Robust Polylactide Barrier Films by Building Densely Oriented Lamellae Incorporated with Ductile in Situ Nanofibrils of Poly(butylene Adipate-Co-terephthalate).

Synergistic enhancement of high-barrier polylactic acid packaging materials by various morphological carbonized cellulose nanocrystals

Significantly improving oxygen barrier properties of polylactide via constructing parallel-aligned shish-kebab-like crystals with well-interlocked boundaries.

Effect of Multiscale Structure on the Gas Barrier Properties of Poly(lactic Acid)/ag Nanocomposite Films

Development of PLA/Lignin Bio-Composites Compatibilized by Ethylene Glycol Diglycidyl Ether and Poly (ethylene glycol) Diglycidyl Ether

Effect of nanocrystalline cellulose on mechanical, thermal, and barrier properties of polylactic acid blown composite film

Design of novel Polylactide composite films with improved gas barrier and mechanical properties using epoxy chain extender‐grafted organic montmorillonite

Superior Ductile and High-barrier Poly(lactic Acid) Films by Constructing Oriented Nanocrystals As Efficient Reinforcement of Chain Entanglement Network and Promising Barrier Wall

Combined Effects of Cellulose Nanofiber Nucleation and Maleated Polylactic Acid Compatibilization on the Crystallization Kinetic and Mechanical Properties of Polylactic Acid Nanocomposite

Significant Enhancement of Crystallization Kinetics of Polylactide in Its Immiscible Blends Through an Interfacial Effect from Comb-Like Grafted Side Chains

Crystallization mechanism and performance of polylactic acid regulated by the synergistic action of nanocrystalline cellulose and polyethylene glycol

Enhancement of Gas Barrier Properties of Graphene Oxide/Poly (Lactic Acid) Films Using a Solvent-free Method

Preparation of poly(lactic acid) grafted glycidyl neodecanoate by solid phase grafting and its compatibilization for poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) composite

The Effect of a Small Amount of Modified Microfibrillated Cellulose and Ethylene–glycidyl Methacrylate Copolymer on the Crystallization Behaviors and Mechanical Properties of Polylactic Acid

Enhancing Interfacial Interactions of Cocontinuous Poly(lactic Acid)/polyethylene Blends Using Vinylsilane Grafted Carbon Nanotubes As Generic Reactive Compatibilizers

Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers