Abstract:ZnO thin films were prepared by radio frequency (RF) reactive magnetron sputtering at varying deposition conditions. The effects of RF power (from 40 to 90 W) and substrate temperature (from 100 to 200 degrees C) on the grain growth behavior, surface morphology evolution, and the structural and optical properties of the films were investigated. Atomic force microscopy (AFM) measurements confirmed that the grain size and surface roughness depend mainly on the RF power and increase with increasing it at the initial deposition stage of 5 s, and are strongly affected by the substrate temperature and increase with increasing it at the final deposition stage of 45 min. The influence of both the deposition parameters on the surface structure of the ZnO films at different deposition stages and the mechanism concerning this influence were discussed. The X-ray diffraction (XRD) and optical absorption spectra analysis indicated that all the films deposited for 45 min are in the state of the compressive stress and exhibit polycrystalline nature with the (002) preferential orientation, and they have high optical transparency in the visible range and sharp absorption edges around the wavelength 360 nm corresponding to the ZnO exciton. With the increase of the RF power and substrate temperature, the grain size increases, the residual compressive stress relaxes, and the optical band gaps broaden. In comparison with the RF power, the substrate temperature has more evident influence on the microstructure of the ZnO thin films.

Influence of Sputtering Power on Optical Quality of Thin Film

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Influence of O_2/Ar Flow Ratio on Microstructures and Photoluminescence of ZnO Films

The Influence of Sputtering Power on Phase-Change Films

Influence of Sputtering Power on Properties of ZnO Thin Films Fabricated by RF Sputtering in Room Temperature

Effect of Sputtering Conditions on the Microstructure and Optical Properties of SnO2 Thin Films

Effect of sputtering power on the microstructure and photelectric properties of Al doped ZnO thin films

The Effect of Sputtering Power on Properties of Ni/SiO2 Composite Film Optical Attenuation Slices

Effect of Sputtering Power on Structural, Cationic Distribution and Optical Properties of Mn2Zn0.25Ni0.75O4 Thin Films

Effect of sputtering power on the properties of SiO 2 films grown by radio frequency magnetron sputtering at room temperature

Effect of the Sputtering Power on the Structure, Morphology and Magnetic Properties of Fe Films

Dependence of Characteristics of Lab6 Films on Dc Magnetron Sputtering Power

Effect of sputtering power on the properties of SiO2 films grown by radio frequency magnetron sputtering at room temperature

Influence of Growing Parameter on the Performance of ZnO Film in MC Sputtering

Effect of deposition angle on the deposition rate, microstructure, electrical and optical properties of magnetron sputtered ZrB 2 thin films

Structural and mechanical properties of amorphous Si–C-based thin films deposited by pulsed magnetron sputtering under different sputtering powers

A Survey of Thickness Uniformity of Thin Films Deposited by Planar Magnetron Sputtering Process

Effect of the Substrate Temperature on the Property of ZnO Films Deposited by Magnetron Sputtering with DC at the Low Power

Grain Growth Behavior, Surface Morphology Evolution, Structures, and Optical Properties of Zno Thin Films Prepared by Rf Reactive Magnetron Sputtering

EFFECTS OF SPUTTERING TECHNICAL PARAMETERS ON THE OPTICAL PROPERTIES OF Ag-In-Sb-Te PHASE-CHANGE FILMS