Abstract:Cracking is the precursor of the final fracture for most engineering materials, often affected by various microstructural characteristics including grain orientation, boundary, precipitation, etc. In this study, the fracture behaviour of a typical Ni-based complex concentrated alloy (CCA) was systematically investigated. These CCAs were fabricated using fine-grain casting and directional-solidification processes, which consists of quasi-single crystal (QSC) and poly crystalline structures respectively. Quasi-static tensile test results combined with morphology characterizations and crystal plasticity analyses suggest that microcracks tend to nucleate at the matrix/carbide interfaces in QSC and then propagate along the maximum slip direction at the crack tips. The crack path showed a distinctive zig-zag shape, beneficial for consuming the crack propagation energy. In consideration of carbide morphology, script-typed carbides were found to be very effective in hindering dislocation movements, resulting in admirable work hardening ability. In polycrystalline, however, microcracks are commonly found near the carbides that precipitate at grain boundaries, then developed quickly to connect with each other, leading to premature intergranular fracture. Grain boundary carbides were detrimental to mechanical performance. Considering the large amounts of investigations on second phase and precipitation, these new findings about carbide-related crack behaviours could be extended to other second phase hardening materials, providing new routes to design high-performance alloys by controlling the precipitation morphology and position.

The Relationship Between Martensitic Transformation, Deformation and Microcrack Nucleation in Cu-Ni-Al Alloys

Role of Interfacial Transition Zones in the Fracture of Cu/V Nanolamellar Multilayers

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Characterization of Strain Distribution and Microstructure at Crack Nucleation Sites in Martensitic Steel Subjected to Tensile Deformation

Cracking in a Fe–25Mn–3Si–3Al Steel

EXPERIMENTAL INVESTIGATION ON THE STRESS-INDUCED MARTENSITIC TRANSFORMATION AND THE MICROSTRUCTURE EVOLUTION IN CuAlNi SINGLE CRYSTAL

In situ TEM studies of the stress-induced martensitic transformation in nanometric NiTi polycrystal strips

Microstructural Evolution and Deformation Micromechanism of Cold-Deformed TiNi-Based Alloys

Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation

Electron Microscopy Analysis of Deformation Induced Ε Martensite Transformation in an Fe-Mn-Si-Cr-Ni Alloy

Analysis of microstructure evolution during tensile stress induced martensitic transformations

In Situ Multi-Fields Investigation on Instability and Transformation Localization of Martensitic Phase Transformation in Niti Alloys

Microstructure, Martensitic Transformation And Superelasticity Of T1(49) (6)N1(45 1)Cu(5)Cr(0 3) Shape Memory Alloy

Study of deformation micromechanism in cold-deformed TiNi based alloys

The Nano- And Mesoscopic Cooperative Collective Mechanisms Of Inhomogenous Elastic-Plastic Transitions In Polycrystalline Tini Shape Memory Alloys

Investigation on the Deformation of TiNi Shape Memory Alloy with a Crack Using Moiré Interferometry

Crack initiation and propagation dominated by strain localization in quasi-single crystal and poly-crystalline of a Ni-based complex concentrated alloy

Structural and Phase Transformations and Physical and Mechanical Properties of Cu-Al-Ni Shape Memory Alloys Subjected to Severe Plastic Deformation and Annealing

Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy

Molecular dynamics simulation of stress distribution and microstructure evolution ahead of a growing crack in single crystal nickel

Crystallographic Mechanisms of Fracture in A Textured Polycrystalline Tini Shape Memory Alloy