Characterization of Strain Distribution and Microstructure at Crack Nucleation Sites in Martensitic Steel Subjected to Tensile Deformation

,,,,Norimitsu Koga,Motoki Fujita,Kosuke Shibata,Shigenobu Nanba

DOI: https://doi.org/10.2355/tetsutohagane.tetsu-2023-055

2024-02-15

Tetsu-to-Hagane

Abstract:The strain distribution and microstructure at the crack nucleation sites in martensitic steel with fine- and coarse-prior austenite grains subjected to tensile deformation were characterized using the digital image correlation method on replica films. Although the tensile properties of the fine- and coarse-prior austenite grain specimens were approximately identical, the total strain was certainly improved in the coarse-prior austenite grain specimen. The crack size increased with the coarsening prior austenite grains, whereas the number of cracks decreased. An inhomogeneous strain was introduced in both the specimens by tensile deformation. The accumulated strain when crack nucleates was approximately the same in both specimens, independent of the prior austenite grain size. In low-strain regions, there were no cracks even though the accumulated strain was comparable to that when crack nucleates in high-strain regions. The strain at the crack nucleation sites was high even before crack nucleation occurred. Cracks primarily nucleated on packet and prior austenite grain boundaries, even in the coarse-prior austenite grain specimen, which confirmed that the prior austenite grain boundary should be a preferential crack nucleation site. It can be concluded that the high local strain and the presence of packet or prior austenite grain boundaries are responsible for crack nucleation in martensitic steel subjected to tensile deformation.

metallurgy & metallurgical engineering