Abstract:In recent publications, we have proposed a model of fatigue damage to steels under multicyclic loading of smooth specimens and dependencies to describe the kinetics of fatigue limit reduction as a damage parameter. Such a decrease is due to the initial fatigue damage of the material at the microstructure level, which leads to the incubation of a crack in the zones of microstructural stress concentrators or its weakest elements, followed by germination along crystallographic planes and then by the transition to growth along forced planes under the action of normal stresses. In the currently known studies, fracture mechanics methods adapted to the growth of short cracks describe fatigue damage at the initial stages of fatigue. Their practical application is complicated by the need to determine the specific characteristics of the microstructure of materials, which are only sometimes available and unambiguous. In this regard, we consider a phenomenological approach based on the assumption of continuous fatigue damage of a material from the beginning of its cyclic loading until fracture or until the initiation of a non-propagating crack at the endurance limit. This damage can be described by a drop in the initial endurance limit to its standardized value at the French line and then to the level determined by the size of the crack at the fracture of the specimen. As the crack grows from the French line to fracture, the endurance limit corresponds to the threshold stress in the terminology of fracture mechanics. To describe the change in the endurance limit, a dependence is proposed that uses the parameters of the fatigue curve. A similar relationship is used to describe crack growth, which causes a decrease in the endurance limit.

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Instrumented indentation measurements of residual stresses around a crack tip under single tensile overloads

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Near-tip Strain Evolution and Crack Closure of Growing Fatigue Crack under a Single Tensile Overload

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

Towards a general damage law for interior micro-defect induced fatigue cracking in martensitic steels

Deformation behavior of plastic zone at crack tip of 304 stainless steel

In-situ Observation and Finite Element Analysis of Fretting Fatigue Crack Propagation Behavior in 1045 Steel

In-situ investigation of fatigue crack growth behavior of 34CrNi3Mo high-strength steel

A computational approach to ductile crack growth under large scale yielding conditions

Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation

Measurement and simulation of strain fields around crack tips under mixed-mode fatigue loading

On multiaxial creep–fatigue considering the non-proportional loading effect: Constitutive modeling, deformation mechanism, and life prediction

Experimental study of crack tip deformation under fatigue load

The strain ratio-dependent multiaxial low cycle fatigue behaviour and life prediction of 316L stainless steel based on critical plane at elevated temperature

Analysis of crack tip transformation zone in austenitic stainless steel laser-MIG hybrid welded joint

Crystal plasticity theory coupled with meso-damage to predict the ratchetting behavior of nickel-based single crystal superalloy