Abstract:This work analyses circuit phase delay for carrier-modulation MEMS capacitive gyroscopes. The temperature-dependent circuit phase delay is a major source of gyroscope output drift, which deteriorates the gyroscope bias instability (BI) and angle random walk (ARW). Effects of both drive-mode and sense-mode circuit phase delay on gyroscope performance when using different signal extraction architectures are analyzed in detail. The online suppression method which combines the so-called modified double sideband (MDSB) extraction architecture in the gyroscope drive mode and closed-loop force-rebalance loop in the sense mode can eliminate the impact of residual fluctuation error of circuit phase delay in real time. When drive-mode circuit phase delay equivalently varies from -20 degrees to 20 degrees, using MDSB decreases the fluctuation of the open-loop zero-rate output (ZRO) by 70% compared to using double sideband (DSB) and by 99.7% with respect to using single sideband (SSB). Meanwhile, improvement for the closed-loop ZRO using MDSB is 92.48% and 94% compared to cases using DSB and SSB, respectively. Furthermore, when the equivalent circuit phase delay of the sense-mode alters from -20 degrees to 20 degrees, ZRO variation for the gyroscope with force rebalanced sense loop and quadrature stiffness nulling loop decreases by 80% in contrast to the case with open loop, which demonstrates the effectiveness of online suppression for circuit phase delay of both the drive-mode and sense-mode. Using the online suppression method, the gyroscope has achieved a BI of 0.16 degrees h(-1) and ARW of 0.011 degrees (root h)(-1). Furthermore, using the MDSB in the drive mode obtains the best stability compared to using the DSB and SSB as the temperature changes.

Phase Detection Scheme Of Vibratory Gyroscope By 2-D Driving Operation

Two-dimensional Excitation Operation Mode and Phase Detection Scheme for Vibratory Gyroscopes

A Novel Amplitude-Phase Information Extraction Architecture for MEMS Vibratory Gyroscopes Using a Modified Double Side-Band Demodulation Configuration

An Improved Phase-Robust Configuration for Vibration Amplitude-Phase Extraction for Capacitive MEMS Gyroscopes

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

Structure Design and Structural Parameter Optimization of Fully Symmetric Vibratory Gyroscope

Effects Of Both The Drive- And Sense-Mode Circuit Phase Delay On Mems Gyroscope Performance And Real-Time Suppression Of The Residual Fluctuation Phase Error

A Robust Triangular-Electrode Based Capacitive Detection Method For Mems Gyroscopes

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

Digital Detection and Optimization Design for Resonant Fiber Optic Gyroscope

Design and Simulation of a Dual-Axis Sensing Decoupled Vibratory Wheel Gyroscope

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Coherent Detection Technique For Resonant Fiber Optic Gyroscope

Three-Dimensional Performance Evaluation of Hemispherical Coriolis Vibratory Gyroscopes

Resonator Fiber Optic Gyroscope with an All Digitalized System

Vibrating wheel micromachined gyroscope for commercial and automotive applications

Dual Beam-Mass Structure Gyroscope Micromachined by Deep Rie Process

Bulk Micromachined Vibrating Wheel Rate Gyroscope

Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

Design of Micromachined Thermal Expansion Gas Gyroscope Signal Detection Circuit