Abstract:This paper reports a novel oscillation control algorithm for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation (MEAM) technique, which enhances the robustness against the frequency variation of the driving mode, compared to the conventional EAM (CEAM) scheme. In this approach, the carrier voltage exerted on the proof mass is frequency-modulated by the drive resonant frequency. Accordingly, the pick-up signal from the interface circuit involves a constant-frequency component that contains the amplitude and phase information of the vibration displacement. In other words, this informational detection signal is independent of the mechanical resonant frequency, which varies due to different batches, imprecise micro-fabrication and changing environmental temperature. In this paper, the automatic gain control loop together with the phase-locked loop are simultaneously analyzed using the averaging method and Routh–Hurwitz criterion, deriving the stability condition and the parameter optimization rules of the transient response. Then, a simulation model based on the real system is set up to evaluate the control algorithm. Further, the proposed MEAM method is tested using a field-programmable-gate-array based digital platform on a capacitive vibratory gyroscope. By optimizing the control parameters, the transient response of the drive amplitude reveals a settling time of 45.2 ms without overshoot, according well with the theoretical prediction and simulation results. The first measurement results show that the amplitude variance of the drive displacement is 12 ppm in an hour while the phase standard deviation is as low as 0.0004°. The mode-split gyroscope operating under atmospheric pressure demonstrates an outstanding performance. By virtue of the proposed MEAM method, the bias instability and angle random walk are measured to be 0.9° h−1 (improved by 2.4 times compared to the CEAM method) and 0.068° (√h)−1 (improved by 1.4 times), respectively.

Two-dimensional Excitation Operation Mode and Phase Detection Scheme for Vibratory Gyroscopes

Phase Detection Scheme Of Vibratory Gyroscope By 2-D Driving Operation

A Novel Amplitude-Phase Information Extraction Architecture for MEMS Vibratory Gyroscopes Using a Modified Double Side-Band Demodulation Configuration

An Improved Phase-Robust Configuration for Vibration Amplitude-Phase Extraction for Capacitive MEMS Gyroscopes

Open-loop Operation Experiments in a Resonator Fiber-Optic Gyro Using the Phase Modulation Spectroscopy Technique.

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

Design and Simulation of a Dual-Axis Sensing Decoupled Vibratory Wheel Gyroscope

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Dual Beam-Mass Structure Gyroscope Micromachined by Deep Rie Process

Three-Dimensional Performance Evaluation of Hemispherical Coriolis Vibratory Gyroscopes

Synchronous In-Phase and Quadrature Demodulation Technique for Resonant Micro-Optic Gyroscope.

Design and Analysis of Optomechanical Micro-Gyroscope for Angular-Vibration Detection

A Novel Microelectromechanical Resonant Gyroscope

Bulk Micromachined Vibrating Wheel Rate Gyroscope

Experimental demonstration of phase-matching and Sagnac effect in a millimeter-scale wedged resonator gyroscope

Vibrating wheel micromachined gyroscope for commercial and automotive applications

A novel oscillation control for MEMS vibratory gyroscopes using a modified electromechanical amplitude modulation technique

Design of Micromachined Thermal Expansion Gas Gyroscope Signal Detection Circuit

Transient response and stability of the AGC-PI closed-loop controlled MEMS vibratory gyroscopes

Eigenmode operation of piezoelectric resonant gyroscopes