Abstract:The separation of a natural gas mixture containing 85 mol% CH4 and 15 mol% N2 by dual reflux pressure swing adsorption (DR PSA) was investigated using dynamic non-isothermal numerical simulations previously benchmarked against experiments. Two different adsorbents were employed: a commercially available activated carbon (AC1) and the recently developed ionic liquidic zeolite (ILZ), which has about twice the selectivity for methane over nitrogen than the activated carbon. Four DR PSA cycle configurations (PL-A, PH-A, PL-B and PH-B) were studied and iteratively optimized in terms of separation performance and energy consumption. The dynamic non-isothermal simulations, implemented in the software platform Aspen Adsorption, included a polytropic compressor model with temperature dependent heat capacities for more realistic predictions of the compressor duty. The heavy product to feed ratio, the feed step time and the light reflux ratio were selected as key optimization parameters for all four cycles at fixed bed pressure ratio, feed location and feed flow rate. The simulations showed that A-cycles were superior to B-cycles in terms of their separation performance for both adsorbent materials. Overall, the separation performance achieved by AC1 was lower than that by ILZ. At optimized conditions for AC1, PL-A and PH-A cycles achieved approximately 92 mol% CH4 in the heavy product and 4.5 mol% CH4 in the light product with corresponding energy requirement at 9.9 kJ mol−1 (feed) and 8.7 kJ mol−1 (feed), while using the ILZ adsorbent, both PL-A and PH-A cycles were able to deliver 0.9 mol% CH4 in the light product and 93.5 mol% CH4 in the heavy product. The cycle work of the PL-A and PH-A configuration using ILZ was 8.8 and 7.7 kJ mol−1 (feed), respectively. These simulation results show that DR PSA processes using ionic liquidic zeolites can meet strict natural gas separation requirements and that such processes can efficiently upgrade sub-quality natural gas.

Psa process for nitrogen production from air

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Evaluation of oxygen separation from air by pressure/vacuum swing adsorption

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

Multiscale design of a pressure swing adsorption process for natural gas purification

Essence of Pressure Swing Adsorption

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

The Production of Industrial-Grade Oxygen from Air by Pressure Swing Adsorption

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Purification of helium from a cryogenic natural gas nitrogen rejection unit by pressure swing adsorption

[Recovery of CO from an Ammonia Plant Tail Gas with Pressure Swing Adsorption Process].

Pilot-scale Experiment for Purification of CO from Industrial Tail Gases by Pressure Swing Adsorption

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Study of Modeling for Fixed-Bed Adsorption Process and Simulation in Experimental CO Separation Through PSA