Abstract:Conventional solid-state photodetectors, such as those made using silicon, are typically diode structures operated with a reverse bias placed across them. Low dark currents result; carriers photo-generated in the depletion region form a drift current which is the basis for light detection. Light with an energy greater than the band gap of the material can be seen. Silicon has a 1.1 eV band gap and devices fabricated from this material therefore react to both ultra-violet and visible wavelengths. The high resistivity of diamond suggests that diode structures may not be needed to achieve low dark currents if this material were used for the fabrication of photodetectors. Metal/diamond/metal devices can be considered which simply rely upon photoconductivity for their operation; such a device could possess high gain, since many carriers may be able to flow around the detector circuit during the lifetime of a photo-generated electron-hole pair. The wide band gap (5.5 eV, 225 run) of diamond implies that this form of photodetector will be capable of detecting deep UV light while being essentially “blind” to visible wavelengths. This property is highly desirable; filtering conventional devices to make them visible blind significantly reduces their sensitivity to UV light. The physical and chemical robustness of diamond also suggests that such devices may be suitable for operation in hostile environments. Diamond can exhibit high carrier mobilities, saturated carrier velocities and electric field breakdown strength; these properties suggest that fast detectors may be realisable. Many industrial, military and environmental applications can thus be envisaged for diamond UV sensors. The emergence of commercially accessible thin-film diamond grown by chemical vapour deposition (CVD) has enabled reliable devices to be developed. In this chapter, the intrinsic and extrinsic photoconductivity of thin-film diamond is reviewed; the design, fabrication and performance of diamond UV photodetectors is then discussed, along with some of the uses for these devices. For some applications, it may be desirable to fabricate diamond photodiodes; the realisation of this type of device from p-type material is also addressed.

A Near-Infrared Diamond Anti-Reflective Filter Window

A Diamond Near Infrared Antireflective Filter Window and Its Application

Cvd Diamond Thin Film For Ir Optics And X-Ray Optics

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Atmospheric-Window-Matching Hierarchical Broadband Infrared Absorber Realized by Lithography-Free Fabrication

In-situ Reflectivity Measurement in the Fabrication of Diamond X-ray Windows

Wide-angle Broadband Antireflection Coatings with Nano-Taper Hydrated Alumina Film.

Decorative near-infrared transmission filters featuring high-efficiency and angular-insensitivity employing 1D photonic crystals

Low-diffraction EMI-shielding Multiband Optical Window Based on Randomized Metallic Mesh

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Wide-angle Broadband Antireflection with Nano-taper Hydrated Alumina Film

Inorganic Multi-Color Transmissive-Type Electrochromic Electrodes Based on Fabry-Perot Interferometer for Full-Solid Smart Window

UV-to-IR highly transparent ultrathin diamond nanofilms with intriguing performances: Anti-fogging, self-cleaning and self-lubricating

Infrared Optical Properties of Diamond Films and Electrical Properties of CVD Diamond Detectors

Highly Transparent Nanocrystalline Diamond Films On Quartz Substrates

Research Progress of Optical Application of Diamond Carbon Films and Diamond-Like Carbon Films

Fabrication, microstructure and optical properties of 〈110〉 textured CVD polycrystalline diamond infrared materials

Conceptual development and characterization of a diamond-based ultraviolet detector

A polycrystalline diamond micro-detector for X-ray absorption fine-structure measurements

CVD Diamond for Ultraviolet and Particle Detectors

Investigation and Batch Fabrication of G-Band Broad Band and Low Loss Monocrystalline Diamond Window for Vacuum Electron Devices