Abstract:Binder jetting additive manufacturing (BJAM), a combination of liquid binder and solid powders, was widely utilized to fabricate complex–structured alumina (Al 2 O 3 ) ceramic cores. However, the high porosity, high brittleness and low mechanical strength of Al2O3 ceramics generally limit their industrial applications. To balance the contradiction between porosity and bending strength and improve the fracture toughness of Al2O3 ceramic core, sodium silicate (Na2O·3.2SiO2) solution and 5 mol% yttrium oxide stabilized zirconia (5YSZ) nanopowders were selected as densifier and toughening phase in this study. By means of the vacuum infiltration and sintering process, the effects of Na2O·3.2SiO2 contents, sintering temperatures and 5YSZ amounts on porosity, bending strength, and fracture toughness of Al2O3 ceramic were systematically investigated. Results show that the porosity and fracture stress of Al 2 O 3 infiltrated with 30 wt.% Na 2 O·3.2SiO 2 solution sintered at 1550 °C reached 21.4±1.1% and about 52.7 MPa, respectively. When the amounts of 5YSZ in 30 wt.% Na 2 O·3.2SiO 2 solution were increased from 0 wt.% to 6 wt.% and the sintering temperatures were varied from 1400 °C to 1550 °C, the fracture toughness of Al 2 O 3 ceramic gradually enhanced to the maximum value of 2.8185±0.071 MPa/m 1/2 obtained at 4 wt.% 5YSZ and 1550 °C, which was increased by 87.44% compared with the infiltrated sample without 5YSZ. Therefore, using BJAM technology to fabricate a strong–tough Al 2 O 3 ceramic cores for the turbine blades casting could realize short process and efficient preparation of the ceramic cores, which had a great theoretical foundation and application potential in the casting field.

EFFECT OF Na2B4O7 ON COMPRESSION- SHEARING STRENGTH OF CERAMIC-LINED PIPES PRODUCED BY CENTRIFUGAL-SHS PROCESS

Effects of Adding ZrSiO4 and TiO2 on Microstructures and Properties of Ceramic-Lined Composite Pipe Made by Centrifugal-Shs Process

Effect of Ceramic Powder on the Performance of Coating

The Effect of the Glass Additive on the Preparation of Ceramic-lined Steel Pipe by SHS Gravitational-thermite Process

Enhanced Comprehensive Properties of Alumina Ceramic Shells by a Pennisetum Fiber/alf3•3h2o Powder Hybrid System

Effect of B2O3 on the Aqueous Tape Casting and Microwave Properties of Li2O–Nb2O5–TiO2 Ceramics

Effect of Binder on Structure and Properties of Ceramic Coatings by Thermochemical Reaction

Influence of Nano SiC on Phase Composition and Properties of Inside Ceramic Lining Coating Prepared on Composite Pipes by Gravitational Separation Self-Propagation High-Temperature Synthesis

Si<sub>3</sub>N<sub>4</sub>/BN Composite Ceramics with Nd<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-Y<sub>2</sub>O<sub>3</sub> Ternary Additives by Pressureless Sintering

Study on influences of mechanical vibration on ceramic-lined pipes produced by self-propagating high-temperature syntheses

Effect of BPO4-B2O3 Composite Additive on Crystallization and Sintering of Silica Ceramics

Effect of additions on the properties of Al2O3/BN machinable ceramics

Effect of sodium silicate solution combined yttrium oxide stabilized zirconia nanopowders on the properties of alumina ceramics fabricated by binder jetting additive manufacturing

Geometric Parameter Influence on Mechanical Strength ofβ″-Al2O3 Ceramics Tubes for Na-S Batteries

Finite element analysis of residual thermal stress in ceramic-lined composite pipe prepared by centrifugal-SHS

Optimization of the Tape Casting Process for Development of High Performance Alumina Ceramics

Effect of the sealing process on the structure and mechanical properties of ceramic-metal sealing fitting

Effect of Ceramic and Nylon Fiber Content on Composite Silica Sol Slurry Properties and Bending Strength of Investment Casting Shell

Effect of B2O3 Addition on Low-temperature Sintering Behavior and Properties of SiC/h-BN Multiphase Ceramics

The Effect of Boehmite on Electrokinetic Behaviours, Rheology and Coagulation for Direct Coagulation Casting of Alumina

Effects of Sintering Additive and Β-Si3n4 Phase Contents on the Properties of Porous Si3N4 Ceramics