Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Finite element analysis of residual thermal stress in ceramic-lined composite pipe prepared by centrifugal-SHS

Finite Element Analysis of the Thermal Stress of the Ceramic Composite Piping Prepared by Centrifugal-SHS

The finite element Analysis of the thermal stress of the stainless steel lined composite steel pipe prepared by centrifugal-SHS

Thermal-fluid-structure Coupling Progressive Failure Analysis for the Type III Composite Cylinder under Localized Fire

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Numerical simulation of residual stress in post internal-welding process of bimetal composite pipe and optimization of welding sequence

Effect of Different Component Materials on Properties of Three-element Composite Piping

High temperature flow behavior and constitutive model of alloy transition layer in composite steel tube prepared by centrifugal self‐propagating high‐temperature synthesis (SHS)

The Thermal and Mechanical Behavior of a Joint Pipe System Calculated by Finite Element Method

Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction

A parametric study of thermal and residual stress fields in lined pipe welding

The Effect of the Glass Additive on the Preparation of Ceramic-lined Steel Pipe by SHS Gravitational-thermite Process

Numerical Simulation to Study the Effect of Arc Travelling Speed and Welding Sequences on Residual Stresses in Welded Sections of New Ferritic P92 Pipes

Finite element synthesized analysis of the forming process of spiral welded pipe

Numerical simulation of thermal and residual stress fields induced by lined pipe welding

ANALYSIS OF TEMPERATURE FIELD AND THERMAL STRESS FOR EXTERNALLY CONNECTED PIPE SOCKETS OF REHEATER BY USING THE FINITE ELEMENT METHOD

Impact Simulation on Ductile Metal Pipe with Polymer Coating by a Coupled Finite Element and Meshfree Method

Stochastic Simulation of Thermal Residual Stress in Environmental Barrier Coated 2.5D Woven Ceramic Matrix Composites

Thermomechanical Coupling Analysis of Heat-Pipe-cooled Leading Edge Thermal Protection Structure with Thermal Contact Resistance

Experimental Investigation of High-temperature Thermal Contact Resistance Between C/C Composite Material and Superalloy GH600