Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Numerical simulation of thermal and residual stress fields induced by lined pipe welding

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

A parametric study of thermal and residual stress fields in lined pipe welding

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

3-D Finite Element Analysis of Welding Residual Stress for Half-Pipe Jacket Made of 304 Stainless Steel

Numerical Simulation of Welding Residual Stress of Tube-to-tubesheet Joint in Heat Exchangers

Finite Element Analysis of the Residual Stress and Distortion of the Welding of Hastelloy-C276 Alloy Pipes

Finite Element Analysis of Welding Residual Stress of Stainless Steel 304 Half-pipe Jacket

Numerical simulation of residual stress in post internal-welding process of bimetal composite pipe and optimization of welding sequence

Numerical Analysis of Welding in Fillet Weld for High-Pressure Pipeline In-Service

Numerical simulation of residual stress before and after post-weld heat treatment in butt-welded pipes with dissimilar steel

Numerical Simulation of Residual Stresses on Butt-Weld of Thick Steel Plate

Numerical Simulation Of Temperature Field And Residual Stress In Multi-Pass Welds In 2.25cr-1mo-0.25v Steel Plate And Comparison With Experimental Measurements

Three-dimensional finite element simulation of residual stresses in circumferential welds of steel pipe including pipe diameter effects

Welding residual stress analysis of the X80 pipeline: simulation and validation

Finite Element Analysis of Modeling Residual Stress Distribution in All-position Duplex Stainless Steel Welded Pipe

Three-dimensional finite element modelling of welding residual stresses of medium carbon steel pipes with consideration of solid-state austenite-martensite transformation and post-weld heat treatment

Welding Numerical Simulation Analysis of AP 1000 Insert Plate and Penetration Sleeves Based on ABAQUS

3D finite element simulation on stress-strain distributions in all position root butt welding of pip

Finite Element Prediction of Residual Stress and Deformation Induced by Double-Pass TIG Welding of Al 2219 Plate