Abstract:To improve the anti-oxidation ability of graphite, Al2O3 and SiC as additives, a uniform SiC coating was prepared on the surface of HTR graphite spheres by the pack cementation and sintering process. The microstructure of SiC coating was characterized by XRD, Raman spectroscopy, scanning electron microscopy, and the effect of Si/C ratio, Al2O3 and SiC content in the starting powder, sintering process conditions on the microstructure of SiC coating was also analyzed. The results show that the SiC coating on the surface of spherical graphite sample can be obtained with Si/C ratio higher than 3: 1, and the SiC coatings with different raw materials possess different microstructure and phase constitutes. The SiC coating is a kind of clear porous microstructure, while the main composition of the coating is β-SiC with some α-SiC and unreacted graphite. It is found that the content of Al2O3 has a significant influence on the penetration into the SiC coating, while the SiC content has a great influence on the microstructure between SiC coating and the substrate. When Al2O3 content is 10%, the bonding between the SiC coating and the substrate is better. When SiC content is 20%, the SiC coatings obtained have good densification and less lamellar accumulation of on the surface of the coatings. The SiC coatings sintered in Ar gas at 1750 °C have larger thickness and porous porosity microstructure, and the maximum thickness, about 400 ∼ 600 μm, can be achieved with the 2h of sintering time. The obtained SiC coatings sintered in vacuum at 1750 °C have a plate-like dense microstructure, in which the main composition of the coating is free Si, α-SiC and β-SiC, and the transitional area between SiC coating and the substrate is not obvious.

Influence of Nano SiC on Phase Composition and Properties of Inside Ceramic Lining Coating Prepared on Composite Pipes by Gravitational Separation Self-Propagation High-Temperature Synthesis

Effects of Adding ZrSiO4 and TiO2 on Microstructures and Properties of Ceramic-Lined Composite Pipe Made by Centrifugal-Shs Process

EFFECT OF DILUENT CONTENT ON Si_3N_4-SiC-TiN CERAMICS PREPARED BY SELF-PROPAGATION HIGH-TEMPERATURE SYNTHESIS

The Effect of the Glass Additive on the Preparation of Ceramic-lined Steel Pipe by SHS Gravitational-thermite Process

In-situ synthesis of Fe Si phases and their effects on the properties of SiC porous ceramics

Study of Ceramic-Lined Nozzle Produced by Static Self-Propagating High-Temperature Syntheses

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

EFFECT OF AL(2)O(3) AND SIC CONTENT IN PACK CEMENTATION POWDERS ON THE MICROSTRUCTURE OF SIC COATINGS ON HTR GRAPHITE SPHERES

Study on the Microstructure of Anti-Corrosion and Wear Resistant Coating on the Inner Wall of Equipment Pipeline and the Synthesis Mechanism of Ceramic Coating

Self-Propagating High-Temperature Synthesis (SHS) of Ti-Containing Ceramic Composites under Ultra-High Gravity

Preparation, microstructure and ion-irradiation damage behavior of Al4SiC4-added SiC ceramics

Preparation of Ternary Layered Ti3SiC2 Ceramic by SHS/PHIP

Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy

Combustion synthesis of Al2O3 ceramic coating and its application

Influences of zirconite on the organizational structure and property of the ceramic-lined composite pipe produced by static SHS

Synthesis and Characterization of Superconducting NbC Nanotubes

Effect of SiCP Content on β-SiAlON/SiC Nanocomposite Ceramic

Phase Separation in Melt-Casting of Ceramic Materials by High-Gravity Combustion Synthesis

Rheological properties and spray-drying behaviors of nano-SiC based aqueous slurry

Sintering Behavior, Microstructure and Mechanical Properties of Silicon Carbide Ceramics Containing Different Nano-Tin Additive

Preparation of Iron-base Al2O3 Ceramic Plane Coating by SHS/PHIP