Abstract:Due to the slow scaling of board and package technology, on-chip inductor has shown promising potential to enable more compact design and smaller parasitics for inductor-based designs, such as voltage regulator, resonant clocking, filter, etc. On the other hand, conventional on-chip 2D spiral inductor must be placed on the top metal layers, thereby consuming significant routing resources for global interconnects. Moreover, it may need more dedicated shielding to prevent unnecessary coupling, which further increases its occupied area. With the popularity of 2.5D and 3D chip architecture, Through-Silicon-Via (TSV) has been widely used, a significant portion of which are placed for thermal/manufacturability/reliability purposes. Thus, those redundant TSVs can be utilized to form the on-chip inductor for 2.5D/3D chips, with lower footprint and higher inductance density compared from the conventional spiral inductor. Unlike prior works focusing on the inductor itself, this paper discusses the optimization and application of such TSV-inductor from system perspective, including the optimization options and its design considerations. The possible design options including physical parameters, architecture and materials, to optimize the TSV-inductor are thoroughly investigated. Based on that, we further study a few key design scenarios to evaluate the design impact with use of such TSV-inductor and provide the design guidelines for its application in actual system designs.

A New Method for Optimizing Layout Parameter of an Integrated On-Chip Inductor in CMOS RF IC's

System-level Design Consideration and Optimization of Through-Silicon-via Inductor.

Modelling On-Chip Circular Double-Spiral Stacked Inductors for RFICs

An Optimization Technique for Planar Spiral Inductor Based on the Inductor's Physical Model and Genetic Algorithm

A Novel Technique Fast Optimizing the Layout Parameters of Planar Spiral Inductor

A Scalable Model of On-chip Inductor Including Tunable Dummy Metal Density Factor

Asic Design of an Integrable Simulated Inductor with Huge Inductance

Capacitance extraction of on-chip circular stacked inductors

A Layout Optimization Method to Reduce Commutation Inductance of Multi-Chip Power Module Based on Genetic Algorithm

Design Optimization and Modeling of On-Chip RF Inductors in 0.13&#x00b5;m and 90nm Standard CMOS

High-Q On-Chip Inductors Embedded in Wafer-Level Package for RFIC Applications

Analytic Design of On-Chip Spiral Inductor with Variable Line Width

High-Q Integrated Inductor Using Post-Cmos Selectively Grown Porous Silicon (sgps) Technique for Rfic Applications

On-chip soft-ferrite-integrated inductors for RF IC

The design and fabrication of LTCC chip inductors for high frequency applications based on barium ferrites

Design of a Novel High Q On-Chip Non-solenoid MEMS Inductor

Substrate engineering of inductors on SOI for improvement of Q-factor and application in LNA

Investigation of On-Chip Soft-Ferrite-Integrated Inductors for Rf Ics-Part Ii: Experiments

Q Value for Structural Optimization of Micromachined Planar Spiral Inductor

Design and Simulation of On-Chip RF Magnetic Medium Inductors

Development of an Inductor Design Tool Based on Multi-Objective Optimization and Finite Element Simulation