Abstract:Due to the slow scaling of board and package technology, on-chip inductor has shown promising potential to enable more compact design and smaller parasitics for inductor-based designs, such as voltage regulator, resonant clocking, filter, etc. On the other hand, conventional on-chip 2D spiral inductor must be placed on the top metal layers, thereby consuming significant routing resources for global interconnects. Moreover, it may need more dedicated shielding to prevent unnecessary coupling, which further increases its occupied area. With the popularity of 2.5D and 3D chip architecture, Through-Silicon-Via (TSV) has been widely used, a significant portion of which are placed for thermal/manufacturability/reliability purposes. Thus, those redundant TSVs can be utilized to form the on-chip inductor for 2.5D/3D chips, with lower footprint and higher inductance density compared from the conventional spiral inductor. Unlike prior works focusing on the inductor itself, this paper discusses the optimization and application of such TSV-inductor from system perspective, including the optimization options and its design considerations. The possible design options including physical parameters, architecture and materials, to optimize the TSV-inductor are thoroughly investigated. Based on that, we further study a few key design scenarios to evaluate the design impact with use of such TSV-inductor and provide the design guidelines for its application in actual system designs.

A Scalable Model of On-chip Inductor Including Tunable Dummy Metal Density Factor

A Compact Circuit Model of On-Chip Multi-layer Spiral Inductors on Silicon Substrate

Stacked Spiral Inductor Design and Modeling for Fully-Integrated DC-DC Converters

Modelling On-Chip Circular Double-Spiral Stacked Inductors for RFICs

A Novel Compact Model for On-Chip Vertically-Coiled Spiral Inductors

Model Description and Parameter Extraction of On-Chip Spiral Inductors for MMICs

Comparative Characteristics of On-Chip Single- and Double-Level Square Inductors

A derived circuit model for spiral inductors on lossy silicon substrate

TSV inductor optimization and its design implication

System-level Design Consideration and Optimization of Through-Silicon-via Inductor.

Double-π Fully Scalable Model for On-Chip Spiral Inductors

Analysis and modelling on CMOS spiral inductor with impact of metal dummy fills

Accurate Model for Micromachined Microwave Planar Spiral Inductors

An Improved Double-Pi Model For Millimeter Wave Cmos On-Chip Inductor

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

Efficient Surrogate Modeling and Design Optimization of Compact Integrated On-Chip Inductors Based on Multi-Fidelity EM Simulation Models

Design Optimization and Modeling of On-Chip RF Inductors in 0.13&#x00b5;m and 90nm Standard CMOS

Wide-Band Modeling On-Chip Spiral Inductors Using Frequency-Dependent Conformal ADI-FDTD Method

Analysis and Equivalent-Circuit Model for CMOS On-Chip Multiple Coupled Inductors in the Millimeter-Wave Region

A physical‐based model for on‐chip double‐layer spiral inductors with a ground shield

An Improved Equivalent Circuit Model Based on the CMOS On-Chip Multiple Coupled Inductors from DC to Millimeter-Wave Region