Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

The Process and Properties of Nanometer Zirconia Powder by Environmental Benign Method

Study on a new, environmentally benign method and its feasibility of preparing nanometer zirconia powder

PREPARATION AND PROPERTIES OF NANOMETER POLYCRYSTALS ZIRCONIA POWDER BYSUPER ALKALINE METHOD AT LOW TEMPERATURE WITH ORGANIC ADDITIVES

Study on the process and properties of nano-sized polycrystal zirconia powders by co-precipitation in super-alkaline medium

Preparation and Microstructure of Nanometer Tetragonal Polycrystal Zirconia Powder at Low Temperature Condition

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Preparation of Nano-ZrO2 powder via a microwave-assisted hydrothermal method

Preparation of spherical zirconia powder by nano-reactor of microemulsion and its densification behavior

Preparation of Zirconia Powders by Sol-gel Process

Processing of Nanocrystalline Zirconium Carbide Powders

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Co-precipitation of nano Mg–Y/ZrO2 ternary oxide eutectic system: Effects of calcination temperature

Preparation of Zirconia Base Solid Solution Nanopowder by Exothermal Solid-State Synthesis

Preparation of spherical zirconia powder in microemulsion system and its densification behavior

Addition of Carbon Nanotubes During the Preparation of Zirconia Nanoparticles: Influence on Structure and Phase Composition

Heat Treatment During Preparation of Nano-zirconia Powders by the Liquid-phase Process

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide

Ultra. Ne Platinum Nanoparticles In Zirconia Nano Films: Preparation And Thermal Stability

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation