Abstract:Spherical shell structures are the most suitable shape for deep-sea pressure hulls because they have ideal mechanical properties for handling symmetrical pressure. However, the shape accuracy requirement for a hull in a spherical shell structure subjected to deep-sea pressure is extremely high. Even minor asymmetry can significantly degrade its mechanical properties. In this study, a new type of spherical deep-sea pressure hull structure and its integral hydro-bulge-forming (IHBF) method are proposed. First, 32 flat metal plate parts are prepared and welded along their straight sides to form a regular polygonally shaped box. Next, water pressure is applied inside the preformed box to create a spherical pressure vessel. We performed a forming experiment using a spherical pressure vessel with a design radius of 250 mm as a verification research object. The radius of the spherical pressure vessel obtained from the forming experiment is 249.32 mm, the error from the design radius is 0.27%, and the roundness of the spherical surface is 2.36 mm. We performed a crushing analysis using uniform external pressure to confirm the crushing and buckling characteristics of the formed spherical pressure vessel. The results show that the work-hardening increased the crushing and buckling load of the spherical pressure vessel, above that of the conventional spherical shell structure. Additionally, it is established that local defects and the size of the weld line significantly and slightly affected the crushing and buckling load of the spherical pressure hull, respectively.

Strength investigation on high pressure vessel with hemispherical head thinner than that of cylinder

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Safety Assessment of the Junction Between a Thick Pressure Vessel Shell and a Thinner Hemispherical Head

Experimental and numerical study on compressive behavior of welded hollow spherical joints with external stiffeners

Comparison of design methods for internally pressurized ellipsoidal head

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

On compressive behavior of large welded hollow spherical joints with both internal and external stiffeners

Analysis of the Boss Structure of Type Ⅳ Composite Vessel for a High-Pressure Hydrogen Tube Trailer

Test Research on Limit Load of Spherical Vessel with Elliptical Nozzle

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Free bulging of thin-walled cylinders closed by two heavy plates

Study on Whole Forming Process of Unequal Thickness Inner Liner for High-Pressure Gas Cylinder

Investigation On The Strength Of Ultra High Pressure Vessel Cylinder With Self-Protective Flat Steel Ribbons Wound

Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment

Hydroforming and buckling of a longan-shaped pressure vessel with longitudinal tension rods

Investigation on the Plastic Deformation During the Stamping of Ellipsoidal Heads for Pressure Vessels