Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

Hydroforming and buckling of a longan-shaped pressure vessel with longitudinal tension rods

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Free bulging and nonlinear buckling of teardrop-shaped pressure hull

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Strength investigation on high pressure vessel with hemispherical head thinner than that of cylinder

Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure

Buckling properties of bulged barrels under external pressure

The Effect of Preform Shape on Hydroforming of a Torsion Beam

Structural analysis of plate-type hydroforming hydraulic press

Buckling Properties of Water-Drop-Shaped Pressure Hulls with Various Shape Indices Under Hydrostatic External Pressure

Hydroforming and buckling of an egg-shaped shell based on a petal-shaped preform

Finite Element Analysis and Experimental Study of Manufacturing Thin-Walled Five-Branched AISI 304 Stainless Steel Tubes with Different Diameters Using a Hydroforming Process

Buckling performance of ellipsoidal pressure hulls with stepwise wall thicknesses

Preform design in hydroforming of automobile lower arm by FEM