Buckling performance of ellipsoidal pressure hulls with stepwise wall thicknesses

Yinhui Tang,Jian Zhang,Fang Wang,Xilu Zhao,Minglu Wang

DOI: https://doi.org/10.1016/j.oceaneng.2023.115165

IF: 5

2023-06-29

Ocean Engineering

Abstract:This study was devoted to the buckling of ellipsoidal pressure hulls with stepwise wall thicknesses. Ellipsoidal pressure hulls were fabricated from an ellipsoidal segmented preform using the internal hydroforming technique. These pressure hulls were closed using two 16-mm-thick closures and had nominal semiminor and semimajor axis lengths of 89 and 125 mm, respectively. The ellipsoidal preform was fabricated from thin-walled stainless plates; eight conical segments were inscribed inside the target ellipsoid. The four segments near the poles and equator of the preform had the nominal thicknesses of 0.67 and 0.83 mm, respectively. The geometries of the preform and hulls were measured optically and ultrasonically. Subsequently, the samples were hydrostatically collapsed through pressurization to evaluate their ultimate strength and collapse modes. The material hardening in the process of hydroforming was analyzed theoretically. The collapse behaviors were further explored through linear and nonlinear finite-element analyses. The numerical and experimental observations were in good agreement with each other, and the hulls had adequate external load-carrying capacities.

engineering, civil, ocean, marine,oceanography