Abstract:Vertical cylindrical welded steel tanks are typical thin-walled structures which are very susceptible to buckling under wind load. This paper investigates the buckling behavior of open-topped steel tanks under wind load by finite element simulation. The analyses cover six common practical tanks with volumes of 2×103m3 to 100×103m3 and height-to-diameter ratios H/D<1. The linear elastic bifurcation analyses are first carried out to examine the general buckling behavior of tanks under wind load, together with comparison to that of tanks under uniform pressure and windward positive pressure (only loaded by positive wind pressure in the windward region). The results show that for larger tanks in practical engineering, the stability carrying capacity of wind load is relatively lower. It is also indicated that the buckling behavior of tanks under wind load is governed by the windward positive pressure while wind pressure in other region of tank essentially has no influence on the buckling performance. The geometrically nonlinear analyses are then conducted to investigate the more realistic buckling behavior of tanks under wind load. It is found that the buckling behaviors of perfect tanks and imperfect tanks are much different. The weld induced imperfection only has little influence on the wind buckling behavior while the classical buckling mode imperfection has significant influence, leading to a considerable reduction of wind buckling resistance. The influences of thickness reduction of cylindrical wall, liquid stored in the tank and wind girder on the buckling behavior are also examined. It shows that the thickness reduction of cylindrical wall considerably reduces the wind buckling resistance while sufficient liquid stored in the tank and wind girder significantly increase the wind buckling resistance.

Buckling properties of bulged barrels under external pressure

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Buckle Propagation of Sandwich Pipes under External Pressure

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Internal Wind Pressures and Buckling Behavior of Large Cylindrical Floating-Roof Tanks under Various Liquid Levels

Buckling of Cylindrical Open-Topped Steel Tanks under Wind Load

Collapse of barreled frustums under external hydrostatic pressure

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Effect of Post-Weld Heat Treatment on the Plastic Buckling of Welded Cylindrical Shells

Free bulging and nonlinear buckling of teardrop-shaped pressure hull

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Buckling Analysis of Cold-stretched Vessels under External Pressure

Free bulging of thin-walled cylinders closed by two heavy plates

Buckling performance of inner corrugated pressure shells under external hydrostatic pressure

Buckling performance of ellipsoidal pressure hulls with stepwise wall thicknesses

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Localized Nonlinear Buckling of Pressure Vessel under Internal Pressure Caused by Initial Geometric Imperfections

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells