Abstract:Vertical cylindrical welded steel tanks are typical thin-walled structures which are very susceptible to buckling under wind load. This paper investigates the buckling behavior of open-topped steel tanks under wind load by finite element simulation. The analyses cover six common practical tanks with volumes of 2×103m3 to 100×103m3 and height-to-diameter ratios H/D<1. The linear elastic bifurcation analyses are first carried out to examine the general buckling behavior of tanks under wind load, together with comparison to that of tanks under uniform pressure and windward positive pressure (only loaded by positive wind pressure in the windward region). The results show that for larger tanks in practical engineering, the stability carrying capacity of wind load is relatively lower. It is also indicated that the buckling behavior of tanks under wind load is governed by the windward positive pressure while wind pressure in other region of tank essentially has no influence on the buckling performance. The geometrically nonlinear analyses are then conducted to investigate the more realistic buckling behavior of tanks under wind load. It is found that the buckling behaviors of perfect tanks and imperfect tanks are much different. The weld induced imperfection only has little influence on the wind buckling behavior while the classical buckling mode imperfection has significant influence, leading to a considerable reduction of wind buckling resistance. The influences of thickness reduction of cylindrical wall, liquid stored in the tank and wind girder on the buckling behavior are also examined. It shows that the thickness reduction of cylindrical wall considerably reduces the wind buckling resistance while sufficient liquid stored in the tank and wind girder significantly increase the wind buckling resistance.

Buckling Analysis of Cold-stretched Vessels under External Pressure

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Buckling of Cylindrical Open-Topped Steel Tanks under Wind Load

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Effect of Post-Weld Heat Treatment on the Plastic Buckling of Welded Cylindrical Shells

Case Study Of Nonlinear Buckling With Shape Distortion Due To Thermal Load Ocr

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Localized Nonlinear Buckling of Pressure Vessel under Internal Pressure Caused by Initial Geometric Imperfections

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

The Influence of Initial Geometric Imperfection on the Localized Buckling of Pressure Vessel under Internal Pressure

Buckling properties of bulged barrels under external pressure

Effect of Welding Residual Stress on Plastic Buckling of Axially Compressed Cylindrical Shells with Patterned Welds

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria