Abstract:Buckling is a failure mode of a large-scale thin-walled ellipsoidal head for a cylindrical steel containment vessel, which is widely used in nuclear power plants such as AP1000 and CAP1400. Manufacturing processes always induce shape imperfections in large-scale thin-walled ellipsoidal heads. However, the study on the effect of shape imperfections on the buckling of a large-scale thin-walled ellipsoidal head subjected to internal pressure is still lacking. In this work, we first used a 3D laser scanner to measure the overall shape of the ellipsoidal head which has a diameter of 5000mm, a radius-to-height ratio of 2.0 and a thickness of 5.5mm. On the basis of the measured overall shape, shape imperfections were determined, and an equation was proposed to quantitatively characterize bulging of weld in the knuckle. Secondly, the measured overall shape and the equation were used to develop FEA models with shape imperfections. Buckling pressures were predicted by using nonlinear FEA. Good agreement between the predictions of the FEA models with shape imperfections indicates that bulging of weld has a considerable effect on buckling pressure. Thirdly, a buckling experiment was performed on the ellipsoidal head and buckling behavior was obtained. The experimental results show that all the buckles occurred at the bulgings of welds. The agreement between the experimental results and the predictions based on the models with shape imperfections is good. At last, FEA models, including different bulging heights of welds characterized by the equation, were established to perform an imperfection sensitivity analysis. Thin-walled ellipsoidal heads subjected to internal pressure demonstrate a significant sensitivity to the bulging height of weld in the knuckle.

The Influence of Initial Geometric Imperfection on the Localized Buckling of Pressure Vessel under Internal Pressure

Localized Nonlinear Buckling of Pressure Vessel under Internal Pressure Caused by Initial Geometric Imperfections

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling behaviour of imperfect ring-stiffened cone–cylinder intersections under internal pressure

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Plastic Buckling of Internal Pressurized Torispherical Pressure Vessel

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Buckling of composite cylindrical shells with ovality and thickness variation subjected to hydrostatic pressure

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Effect of Shape Imperfection on the Buckling of Large-Scale Thin-Walled Ellipsoidal Head in Steel Nuclear Containment

Analysis of the Elastic-Plastic Buckling Behavior of the Pressure Vessels with Dished Heads under Internal Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure