Abstract:Large steel silos are typical kinds of thin-walled structure which are widely used for storing huge quantities of granular solids in industry and agriculture. In the present analyses, buckling design of large steel silo subject to wind pressure is demonstrated in accordance with Eurocode (EN1990, 1991, 1993) and the proposed combinational Load Case WE (wind and empty silo) and WF (wind and full silo). The finite element model is established by using the commercial general purpose computer package ANSYS. Five types of buckling analyses are carried out for the geometrically perfect and imperfect models with and without the consideration of the material plasticity, which are designated as LBA, GNA, GMNA, GNIA, and GMNIA in EN 1993 Part 1–6. The geometrical imperfections are known to have a large impact on the buckling behavior of steel silo structure, in which the magnitude and distribution of the weld depression during construction process is adopted to account for fabrication quality. The buckling behavior of a reference silo with a diameter of 40m and an aspect ratio of 0.9 is first investigated, which shows that the buckling behaviors from Load Case WE and WF are much different. The material nonlinearity shows little influence on buckling resistance in Load Case WE, while the buckling resistance and buckling mode is much sensitive to weld imperfection. In Load Case WF, both material nonlinearity and geometrical nonlinearity effect is strong and detrimental to buckling behavior of steel silos, resulting in decrease of buckling resistance. The buckling deformation corresponding to the critical point in Load Case WE is governed by the circumferential compression which is generated in the windward region of the shells localized at the top part of silo wall. The buckling mode in Load Case WF takes the form of the well-known elephant-foot deformation at the bottom part of the shell wall, which is induced by the meridional compressive stress. It is also indicated from the parametric analyses that the buckling resistance of steel silo is closely correlative with the loading conditions involving the wind velocity, the patch load, and the geometrical parameters including the aspect ratio, the radius-to-thickness ratio, the type of wall thickness, and the wall openings.

Internal Wind Pressures and Buckling Behavior of Large Cylindrical Floating-Roof Tanks under Various Liquid Levels

Buckling of Cylindrical Open-Topped Steel Tanks under Wind Load

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 2: CFD Simulation and Finite Element Analysis

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 1: Wind Tunnel Test

Wind loads on large cylindrical open-topped tanks in group

Wind Loads on Fixed-Roof Cylindrical Tanks with Very Low Aspect Ratio

Buckling strength of cylindrical steel tanks under harmonic settlement

Stability Analysis of Floating-Roof Tanks under Differential Settlement

Buckling design of large circular steel silos subject to wind pressure

Wind induced buckling of large circular steel silos with various slenderness

Buckling Behavior of Floating-Roof Steel Tanks under Measured Differential Settlement

Effect Of Hydrostatic Pressure On Buckling Behavior Of Storage Tanks Under Local Support Settlement

Numerical Simulation of Internal Gaseous Explosion Loading in Large-Scale Cylindrical Tanks with Fixed Roof

Buckling Analysis of Open Top Tanks Subjected to Harmonic Settlement

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Floating-roof Steel Tanks under Harmonic Settlement: FE Parametric Study and Design Criterion

STRENGTH AND STABILITY ANALYSIS OF DOUBLE-DECK FLOATING ROOF UNDER WIND LOAD

Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

Research Of Weld On Axial Buckling Stress Of Multilayer Combined Cylindrical Shells

Experimental Investigation on Dynamic Fluid Pressure of Liquid Storage Tanks under Seismic Excitations Based on Rain Flow Counting Method

Buckling of Steel Tanks under Measured Settlement Based on Poisson Curve Prediction Model