Abstract:Vertical cylindrical welded steel tanks are typical thin-walled structures which are very susceptible to buckling under wind load. This paper investigates the buckling behavior of open-topped steel tanks under wind load by finite element simulation. The analyses cover six common practical tanks with volumes of 2×103m3 to 100×103m3 and height-to-diameter ratios H/D<1. The linear elastic bifurcation analyses are first carried out to examine the general buckling behavior of tanks under wind load, together with comparison to that of tanks under uniform pressure and windward positive pressure (only loaded by positive wind pressure in the windward region). The results show that for larger tanks in practical engineering, the stability carrying capacity of wind load is relatively lower. It is also indicated that the buckling behavior of tanks under wind load is governed by the windward positive pressure while wind pressure in other region of tank essentially has no influence on the buckling performance. The geometrically nonlinear analyses are then conducted to investigate the more realistic buckling behavior of tanks under wind load. It is found that the buckling behaviors of perfect tanks and imperfect tanks are much different. The weld induced imperfection only has little influence on the wind buckling behavior while the classical buckling mode imperfection has significant influence, leading to a considerable reduction of wind buckling resistance. The influences of thickness reduction of cylindrical wall, liquid stored in the tank and wind girder on the buckling behavior are also examined. It shows that the thickness reduction of cylindrical wall considerably reduces the wind buckling resistance while sufficient liquid stored in the tank and wind girder significantly increase the wind buckling resistance.

STRENGTH AND STABILITY ANALYSIS OF DOUBLE-DECK FLOATING ROOF UNDER WIND LOAD

Internal Wind Pressures and Buckling Behavior of Large Cylindrical Floating-Roof Tanks under Various Liquid Levels

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 1: Wind Tunnel Test

Response of Large Scale Oil Storage Tanks Subjected to Wind Load

Stress and Deflection Analyses of Floating Roofs Based on a Load-Modifying Method

RESEARCH ON THE COORDINATED WORKING BETWEEN SINGLE LAYER-LATTICED SHELL ROOF AND STORAGE TANK

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 2: CFD Simulation and Finite Element Analysis

Stability Analysis of Floating-Roof Tanks under Differential Settlement

Floating-roof Steel Tanks under Harmonic Settlement: FE Parametric Study and Design Criterion

Dynamic stability analysis of liquid storage tanks based on Floquet theory

Green Water Loading on a Floating Structure with Degree of Freedom Effects

DETERMINATION OF WIND LOADS ON CANTILEVERED ROOFS OF STADIUM GRANDSTAND

Design and Stability Analysis of the Latticed Shell Structure Located at Yuyao Tianluoshan Relic

Buckling of Cylindrical Open-Topped Steel Tanks under Wind Load

NUMERICAL SIMULATION OF WIND PRESSURES ON CANTILEVER GRANDSTAND ROOFS

STRESS TEST ANALYSIS OF 15×10~4 m~3 FLOATING ROOF TANK MADE OF HOME-MADE STEEL PLATE

Stress Analysis of Large Oil Storage Tanks Based on Combined Cylindrical Shell

A load-modifying method for finite element analysis of floating roofs under rainwater loading

Overall Strength Analysis of Floating Offshore Wind Turbine Foundation

Analysis of Floating Roofs by ODE-Solver Method

Floating-roof tanks' distortion analysis based on measured settlement