Abstract:The structure of the plate rib roof can’t meet the need of the constantly enlarging storage tanks, thus more steel/aluminum net shell roofs have been used on the large storage tanks. The bearing between the roof and the tank wall is a key component, because it directly affects the strength and stability of the net shell roof. In this paper, a new type of net shell roof bearing structure is proposed in order to relieve the stress on the bearing and the net shell roof. The proposed structure has several features compared with the existing bearings: the net shell roof with the new bearing can allow a certain amount of radial displacement, and the bearing can also rotate within a certain angle. According to the actual loading status, strength and stability analysis of the overall net shell roof and the bearing’s partial structure are carried out respectively. The overall model of the net shell roof is established by ANSYS, and different boundary conditions are defined on the roof under two working conditions of “full-span live load” and “half-span live load”. Then the overall static strength calculation and stability analysis of the roof are completed. Based on the results of the overall analysis, the strength of the bearing’s partial model is analyzed in ANSYS Workbench. Research shows that when the net shell roof is under load, the roof is allowed to make radial displacement and the bearing to make angular displacement. Thus the burden on the bearing and the net shell roof is relieved, and the strength and stability of the overall roof meet the requirements. Moreover, many regions of the bearing can share the horizontal force, which helps to reduce the load on the bolts and improve the safety of the bearing structure. And the strength of the bearing meets the requirements.

RESEARCH ON THE COORDINATED WORKING BETWEEN SINGLE LAYER-LATTICED SHELL ROOF AND STORAGE TANK

Shape Determination and Static Experimental Study of Double Inner and Outer Latticed Shell String Structure

Model Designing and Static Experimental Study on Double Inner and Outer Latticed Shell String Structure

Optimal analysis of folded plate type latticed shell

SIMPLIFIED CALCULATION METHOD AND EXPERIMENTAL RESEARCH ON PRESTRESSED FOLDED-PLANE RETICULATED SHELL

Study on Dynamic Characteristics of a New Space Latticed Shell String Structure

Form and Structural Properties of a New Lattice Shell String Structure

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

Configuration, Static and Stability Analysis of Torsional Lattice Shell Composed of Six-bar Tetrahedral Units

Design of a New Bearing on the Large Net Shell Roof Tank

Design and Stability Analysis of the Latticed Shell Structure Located at Yuyao Tianluoshan Relic

A New Bearing Structure of Large Storage Tanks with A Reticulated Shell Dome and its Optimization

Structure Design and Stability Calculation of Large Storage Tanks with a Reticulated Shell Dome

THE PRATICAL APPLICATION OF STRING-BOW LATTICED SHELL STRUCTURE

Study on the calculation of life-cycle cost of latticed shell structures

Wind Loads and Wind-Resistant Behaviour of Large Cylindrical Tanks in Square-Arrangement Group. Part 2: CFD Simulation and Finite Element Analysis

Stability Analysis of Floating-Roof Tanks under Differential Settlement

Elastic-plastic dynamic stability analysis of single layer spherical latticed shells considering damage accumulation effect

Seismic analysis of a large base-isolated liquid storage tank with fixed roof based on added mass method

Internal Wind Pressures and Buckling Behavior of Large Cylindrical Floating-Roof Tanks under Various Liquid Levels

Stress Analysis of Large Oil Storage Tanks Based on Combined Cylindrical Shell