Abstract:Spherical shell structures are the most suitable shape for deep-sea pressure hulls because they have ideal mechanical properties for handling symmetrical pressure. However, the shape accuracy requirement for a hull in a spherical shell structure subjected to deep-sea pressure is extremely high. Even minor asymmetry can significantly degrade its mechanical properties. In this study, a new type of spherical deep-sea pressure hull structure and its integral hydro-bulge-forming (IHBF) method are proposed. First, 32 flat metal plate parts are prepared and welded along their straight sides to form a regular polygonally shaped box. Next, water pressure is applied inside the preformed box to create a spherical pressure vessel. We performed a forming experiment using a spherical pressure vessel with a design radius of 250 mm as a verification research object. The radius of the spherical pressure vessel obtained from the forming experiment is 249.32 mm, the error from the design radius is 0.27%, and the roundness of the spherical surface is 2.36 mm. We performed a crushing analysis using uniform external pressure to confirm the crushing and buckling characteristics of the formed spherical pressure vessel. The results show that the work-hardening increased the crushing and buckling load of the spherical pressure vessel, above that of the conventional spherical shell structure. Additionally, it is established that local defects and the size of the weld line significantly and slightly affected the crushing and buckling load of the spherical pressure hull, respectively.

Test Research on Limit Load of Spherical Vessel with Elliptical Nozzle

Study on Methods for the Reinforcement of Pressure Vessels with Large Openings

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints Connected with Square Steel Tubes

Load-carrying capacity of welded hollow spherical joints subject to combined planar tri-directional axial force and bending moment

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Load-carrying Capacity and Practical Calculation Method of Welded Hollow Spherical Joints with Square Steel Tubes Subjected to Combined Axial Forces and Biaxial Bending Moments

Elastic-Plastic Finite Element Analysis of the Internal Pressure Vessels with Large Nozzles

Strength investigation on high pressure vessel with hemispherical head thinner than that of cylinder

A novel plastic limit load solution for the orthotropic cylindrical shell with nozzle under internal pressure

Application of Load Release Factor Method in Thermal Expansion Load Imposed on Vessel Nozzle

Numerical and Experimental Investigation on Limit Load of Elbow with Local Thinning Area

An Analytical Method for Cylindrical Shells with Nozzles Due to Internal Pressure and External Loads-Part Ii: Design Method

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Stability Analysis for the Pressure Vessel with Special Tangential Nozzle

Numerical Simulation on Dynamic Response of the Cylindrical Explosion Containment Vessel with an Elliptical Cover

Further study on strain growth in spherical containment vessels subjected to internal blast loading

Strength evaluation of elliptical head-nozzle construction based on ANSYS

Design and Manufacturing Process of a New Type of Deep-Sea Spherical Pressure Hull Structure

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

A Universal Design Method Based on Analysis for Cylindrical Shells with Nozzles Due to Internal Pressure, External Forces and Moments: Part II

EXPERIMENTAL INVESTIGATION ON LIMIT PRESSURE OF ORTHOGONALLY INTERSECTING CYLINDRICAL SHELLS WITH DIFFERENT DIAMETERS