Abstract:Ellipsoidal and torispherical heads, whose geometric shapes are close, are usually used as end closures of internally pressurized vessels. In pressure vessel codes, for example, ASME BPVC Section VIII, ellipsoidal heads are designed as torispherical heads using geometric equivalency approaches. However, the difference between ellipsoidal and equivalent torispherical heads has not been studied in detail. In this paper, we first investigate the shape deviation between the two types of heads. Then we compare the elasticplastic behaviors between ellipsoidal and equivalent torispherical heads as well as their failure modes, i.e., buckling and plastic collapse. It is found that ellipsoidal heads have more buckling resistance than equivalent torispherical heads, indicating that the current design rules for buckling failure based on the geometric equivalency approaches result in uneconomical design. Nevertheless, the shape deviation has little effect on plastic collapse pressures of ellipsoidal and equivalent torispherical heads, showing that the geometric equivalency approaches are applicablefor such heads thatfail by plastic collapse (bursting). In addition, the experimental and numerical results show that such heads experience geometric strengthening. The FE method considering the effect of geometric strengthening provides a good prediction about plastic collapse (bursting) pressure. However, the current design equation for bursting does not consider the effect ofgeometric strengthening, also leading to uneconomical design. Therefore, in order to avoid uneconomical design, we recommend that (1) with respect to the buckling of ellipsoidal heads, a new design equation be proposed rather than implementing the geometric equivalency approaches, and (2) the current design equation for bursting be deleted, and a new design equation, considering the effect of geometric strengthening, be proposed for the bursting of ellipsoidal and torispherical heads subjected to internal pressure.

Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment

Effect of Shape Imperfection on the Buckling of Large-Scale Thin-Walled Ellipsoidal Head in Steel Nuclear Containment

Comparison of design methods for internally pressurized ellipsoidal head

Circumferential buckling of steel liners for the containment in NPPs

Buckling Behavior of Large-Scale Thin-Walled Ellipsoidal Head under Internal Pressure

A new formula to predict buckling pressure of steel ellipsoidal head under internal pressure

Buckling of Cold-Stretched Cylindrical Vessels under External Pressure: Experimental and Numerical Investigation

Investigation of buckling of double-walled carbon nanotubes embedded in an elastic medium using the energy method

Experimental and Numerical Buckling Failure Analysis of Acrylic Hemispheres for Application in Neutrino Detector

COMPARISON OF ELLIPSOIDAL AND EQUIVALENT TORISPHERICAL HEADS UNDER INTERNAL PRESSURE: BUCKLING, PLASTIC COLLAPSE AND DESIGN RULES

A New Method for Preventing Plastic Collapse of Ellipsoidal Head under Internal Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Proposal of the buckling design method by elasto-plastic buckling analysis for steel containment vessel of nuclear power plant

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling behaviour of steel dome cap design under external pressure

Effect of Weld on Axial Buckling of Cylindrical Shells

Buckling Test of Metallic Thin-Walled Cylindrical Shells under Non-Uniform Axial Compression Loads

Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Buckling of Externally Pressurised Ellipsoidal Domes with Variable Wall Thicknesses