Abstract:Buckling is a failure mode of a large-scale thin-walled ellipsoidal head for a cylindrical steel containment vessel, which is widely used in nuclear power plants such as AP1000 and CAP1400. Manufacturing processes always induce shape imperfections in large-scale thin-walled ellipsoidal heads. However, the study on the effect of shape imperfections on the buckling of a large-scale thin-walled ellipsoidal head subjected to internal pressure is still lacking. In this work, we first used a 3D laser scanner to measure the overall shape of the ellipsoidal head which has a diameter of 5000mm, a radius-to-height ratio of 2.0 and a thickness of 5.5mm. On the basis of the measured overall shape, shape imperfections were determined, and an equation was proposed to quantitatively characterize bulging of weld in the knuckle. Secondly, the measured overall shape and the equation were used to develop FEA models with shape imperfections. Buckling pressures were predicted by using nonlinear FEA. Good agreement between the predictions of the FEA models with shape imperfections indicates that bulging of weld has a considerable effect on buckling pressure. Thirdly, a buckling experiment was performed on the ellipsoidal head and buckling behavior was obtained. The experimental results show that all the buckles occurred at the bulgings of welds. The agreement between the experimental results and the predictions based on the models with shape imperfections is good. At last, FEA models, including different bulging heights of welds characterized by the equation, were established to perform an imperfection sensitivity analysis. Thin-walled ellipsoidal heads subjected to internal pressure demonstrate a significant sensitivity to the bulging height of weld in the knuckle.

Circumferential buckling of steel liners for the containment in NPPs

Elastic and Inelastic Buckling of Thin-Walled Steel Liners Encased in Circular Host Pipes under External Pressure and Thermal Effects

Numerical analysis of the liners encased in a rigid cavity

Experimental Investigation on Buckling of Ellipsoidal Head of Steel Nuclear Containment

Stability Performance of Steel Liner Domes of Nuclear Reactor Containment During Construction

Elastic Buckling of Functionally Graded Rings Under Hydrostatic Pressure

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Theoretical analyses of thermal post-buckling problems of liner shells

Effect of Shape Imperfection on the Buckling of Large-Scale Thin-Walled Ellipsoidal Head in Steel Nuclear Containment

Nonlinear analyses of thermal postbuckling problems of liner shells

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Elastic Buckling of Thin-Walled Polyhedral Pipe Liners Encased in a Circular Pipe under Uniform External Pressure

Functional failure criterion based on biaxial tensile testing of steel liners and its application to fragility analysis of nuclear containment under overpressure conditions

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Stability of submarine bi-material pipeline-liner system with novel polyhedral composites subjected to thermal and mechanical loading fields

Stability Assessment of CIPP Liners under Varied Boundary Conditions: A Theoretical and Simulation Study

On Instability Failure of Corroded Rings under External Hydrostatic Pressure

Effects of Ringed Stiffener on the Buckling Behavior of Cylindrical Shells with Cutout under Axial Compression: Experimental and Numerical Investigation

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Finite element analysis of the buckling of the liner of composite pressure vessel with depression

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure