Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Theoretical analyses of thermal post-buckling problems of liner shells

Nonlinear analyses of thermal postbuckling problems of liner shells

Numerical analysis of the liners encased in a rigid cavity

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Stability analysis method for lattice shells accounting for buckling of members

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Flexural–torsional buckling of thin-walled beam members based on shell buckling theory

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

A New Derivation of the Buckling Theory of Thin-Walled Beams

Nonlinear Dynamic Analysis of Shells Using Finite Particle Method

Energy Barrier and Post-Buckling Behavior for Thermal Buckling of a Liner Shell

A new set of explicit solutions for postbuckling behaviour of anisotropic shear deformable laminated cylindrical shells with general imperfection distribution and thermal loading

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Circumferential buckling of steel liners for the containment in NPPs

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression