Abstract:To tackle the high cost of single‐crystal silicon carbide (SiC) chips caused by ≈70% material waste during back grinding, a novel bonding method is proposed. By employing ion beam etching (IBE) to activate single‐crystal and polycrystal SiC surfaces, direct bonding (≈20 MPa) after annealing in the atmosphere is achieved while suppressing silicon oxide formation to lower interface thermal resistance. High‐quantity single‐crystal silicon carbide (SiC) is widely used in power electronics due to its excellent breakdown electric field strength and high thermal conductivity. However, back grinding during the chip fabrication generally results in ≈70% of single‐crystal SiC being wasted, leading to the high cost of SiC chips. In order to improve the utilization, single‐crystal SiC on polycrystal SiC (SoP‐SiC) is bonded. The challenge to achieve excellent bonding interfaces for such a system is the heterogeneous surface of polycrystals in which those grains with different orientations usually have different physical and chemical properties, making it difficult to achieve sufficiently smooth surfaces for bonding. Here, ion beam etching (IBE) is employed to activate the surface of polycrystal and single‐crystal SiC and achieve high bonding strength (up to ≈20 MPa) after annealing in the atmosphere. Sub‐nanometer‐scale electron microscopy and energy spectroscopy analysis showing the IBE method can effectively inhibit the formation of silicon oxide at the bonding interface, which is expected to reduce the interface thermal resistance according to the phonon spectrum analysis. This study provides a novel method to fabricate single‐polycrystal SiC junctions with high bonding strength and high thermal conductivity, which is valuable for the SiC industry.

Structure and Strength of Sic/V Bonding Interface

Layer Structure and Fracture Strength of Sic/Cr Joint

Structure and Strength of SiC/Ti Bonding Interface.

Structures and Strength of Sic/Nb Bonding Interface

Interfacial Reaction and Strength of Sic/Ta/Sic Joint

Reaction-Mechanism Between Sic Ceramic and Ti Foil in Solid-State Bonding

Phase Reactions and Diffusion Path of the SiC/Cr System

Interface structure and formation mechanism of diffusion-bonded SiC/Ni-Cr joint

Reaction mechanism and mechanical properties of SiC joint brazed by in-situ formation of Ti3SiC2

Microstructure, Mechanical Property and Bonding Mechanism of SiC Ceramic Joint Using a Novel Y2Si2O7/Mullite Glass-Ceramic Interlayer

Interface structure and formation mechanism of vacuum-free vibration liquid phase diffusion-bonded joints of SiCp/ZL101A composites

Interfacial reaction mechanism of SiC joints joined by pure nickel foil

Microstructure and mechanical properties of SiC/SiC joints reinforced by in-situ growth SiC nanowires

An ultra-strength SiC ceramic joint with an in-situ formed high-entropy carbide interlayer via diffusion bonding by spark plasma sintering

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Single‐Crystal and Polycrystal SiC Bonding for Cost‐effective Chip Fabrication

A Novel Composite Interlayer Assembled for C/SiC-GH99 Brazed Joints

Ultrafast low-temperature near-seamless joining of Cf/SiC using a sacrificial Pr3Si2C2 filler via electric current field-assisted sintering technique

SiC fiber strengthened Si 14Ti high-temperature filler alloy for brazing SiC f /SiC and C/C composites

Wettability and Joining of SiC by Sn-Ti: Microstructure and Mechanical Properties

SiC-Al Interface Structure in Squeeze Cast Composite