Abstract:Traditional laser lithography systems cannot write sub-wavelength patterns due to the diffraction limit. In this paper, a novel super-resolution laser direct writing method is proposed to break through the diffraction limit. Compared with conventional lithography systems, the photoresist layer in this method is overlaid by an extra photochromic layer which is a mixture of metanil yellow and aqueous PVA solution. Then a vortex beam with a hollow energy distribution is used to expose the photochromic layer and make an annular region of the photochromic layer opaque to the writing beam. Thus, a virtual aperture is formed in the photochromic layer which can confine the diameter of the writing beam and reduce the linewidth exposed in the photoresist layer. Lithography process of this new method was modeled and a corresponding simulation was made. In this simulation, the intensity ratio of the two beams, relative absorption coefficients and other parameters were changed to study their influence to linewidth in the photoresist. An experimental setup was designed to validate the simulation, where the wavelengths of the writing beam and the vortex beam are 405 nm and 532 nm, respectively. These two beams are strictly coaxial when they are incident to the photochromic layer. The experimental results agree quite well with the model simulation, showing that the linewidth could be reduced by increasing the intensity ratio of the vortex beam to the writing beam. They also indicate that the vortex beam could effectively reduce the lithography linewidth to 300nm or even smaller.

KrF excimer laser phase-shifting lithography in HEMT fabrication

Click chemistry assisted organic-inorganic hybrid photoresist for ultra-fast two-photon lithography

Laser Direct Writing System and Its Lithography Properties

Photolithography Using Lateral Surface of Nanofibers

Lithography Process for KrF in the Sub-0.11 Μm Node

Reconfigurable phase-change photomask for grayscale photolithography

X-Ray Lithography Technology for the Fabrication of Deep-Submicron T-Shaped Gate

Electromagnetic modeling of near-field phase-shifting contact lithography with broadband ultraviolet illumination

A phase-change lithography system based on a fast autofocusing method

Interference Lithography Based on a Phase Mask for the Fabrication of Diffraction Gratings

Antireflective Subwavelength Structures at A Wavelength of 441.6 Nm for Phase Masks of Near Field Lithography

High-resolution Laser Lithography Based on Vortex Laser and Composite Layer

Electrohydrodynamic Direct-Writing Lithography: an Alternative Maskless Technique for Microstructure Fabrication

Fabrication of GaAs/AlGaAs high electron mobility transistors with 250 nm gates using conformal phase shift lithography

KrF Photoresist Profile Modulation by NH 3 Plasma Treatment for 28 nm SRAM

High Resolution Photolithography with Sub-Wavelength Grating

The Research on Alternating Phase-shifted Mask Design of 100 Nm Resolution

Exposure Strategy and Crystallization of Ge-Sb-Te Thin Film by Maskless Phase-Change Lithography

Optimized Design of Four-Zone Phase Pupil Filter for Nanoscale Phase Transition Optical Lithography

High-Efficiency Fabrication of Geometric Phase Elements by Femtosecond-Laser Direct Writing

Methods for extending working distance using modified photonic crystal for near-field lithography