Abstract:A two-axis Lloyd's mirrors interferometer based optical fabrication system was theoretically investigated and constructed for patterning high-uniformity nanoscale crossed grating structures over a large area with a high throughput. The current interferometer was configured with two reflected mirrors and a grating holder, which are placed edge by edge and orthogonal with each other. In such a manner, the two beams reflected from the two mirrors interfere with the incident beam, respectively, forming a crossed grating patterns with only one exposure. Differing from the conventional solution for elimination of unexpected interference between the two reflected beams, a systematical analysis, that is based on the proposed index indicating the non-orthogonality between the two beams at different incident angles, was conducted by using a spatial full polarization tracing method. Without polarization modulation to eliminate the additional interference, an optimal exposure condition with small non-orthogonality between reflected beams was found at a certain incident angle range, while the two required interferences to construct cross grating still remain high. A pattern period of ∼1 µm-level crossed grating structure could be obtained through balancing the structure area and the non-orthogonality. Finally, the exposure setup with orthogonal two-axis Lloyd's mirrors interferometer is established, and the crossed grating structure with the periods of 1076 nm along X-direction and 1091 nm along Y-direction was successfully fabricated on a silicon substrate via microfabrication technology over a large area of 400 mm2. The uniformity of crossed grating array over the whole area was evaluated by an atomic force microscope, and the standard deviations of structure periods along X- and Y-directions smaller than 0.3% are achieved. It is demonstrated that the orthogonal two-axis Lloyd's mirrors interferometer based on single-beam single-exposure scheme with non-orthogonality systematic analysis is an effective approach to fabricate crossed grating patterns of 1 µm-level period with high uniformity over a large area.

Interference Lithography Based on a Phase Mask for the Fabrication of Diffraction Gratings

Fabrication of a Two-Dimensional Diffraction Grating by a Two-Axis Lloyd's Mirror Interferometer

Analysis of a Lloyd's Mirror Interferometer for Fabrication of Gratings

Generalized method for probing ideal initial polarization states in multibeam Lloyd's mirror interference lithography of 2D scale gratings

Optimization and Fabrication of Chromium Grating in Self-Traceable Interferometer

Plasmonic Interference Lithography Based on the Second-Order Diffracted Wave of Grating and Hyperbolic Multilayer Graphene

Refined Grating Fabrication Using Displacement Talbot Lithography

Low-cost lithography for fabrication of one-dimensional diffraction gratings by using laser diodes

Fabrication of two-dimensional micro patterns for adaptive optics by using laser interference lithography

Plasmonic Interference Lithography by Coupling the Bulk Plasmon Polariton Mode and the Waveguide Mode

Patterning Nanoscale Crossed Grating with High Uniformity by Using Two-Axis Lloyd's Mirrors Based Interference Lithography.

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Contact-interference Hybrid lithography: Toward Scalable Fabrication of cross-scale periodic micro structure and demonstration on infrared micro polarizer array

Sub-diffraction-limited Interference Photolithography with Metamaterials

Fabrication of Optical Mosaic Gratings by Consecutive Holographic Exposures Employing A Latent-Fringe Based Alignment Technique

Interference Photolithography with Metamaterials

Optical Mosaic Gratings Made by Consecutive, Phase-Interlocked, Holographic Exposures Using Diffraction from Latent Fringes

Global Alignment Reference Strategy for Laser Interference Lithography Pattern Arrays

The Design, Fabrication and Performance of A Large Area 10000 Line/Mm Metal Transmission Diffraction Gratings for Soft X-Ray

Holographic Fabrication of Two-Dimensional Scale Gratings for Surface Encoder by Using an Orthogonal Type Two-Axis Lloyd's Mirror Interference Lithography

Reconfigurable phase-change photomask for grayscale photolithography