Abstract:The analytical performances of a coupled hydride generation, integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system were evaluated for determination of Ge and Sn and inorganic tin species in environmental samples. Germanium and tin hydrides were atomized in air-acetylene flame-heated IAT. A new design of HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangements (a water-cooled single silica tube, double-slotted quartz tube) permitting construction of an “integrated trap” was investigated. For the estimation of Sn(II) and Sn(IV) concentrations in samples, the difference between the analytical sensitivities of the absorbance singnals obtained for tin hydride without and with previous treatment of samples with L-cysteine could be used. The concentration of Sn(IV) was calculated by the difference between total Sn(tot) and Sn(II). An improvement in limit of detection was achieved compared with that obtained using any of the aforementioned atom trapping techniques separately. The concentration limits of detection were 25 and 8 ng mL−1 for Ge and Sn, respectively. For a 2 min in situ preconcentration time, sensitivity enhancement, compared to FAAS, were 10 and 14 folds for Ge and Sn, respectively, using hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The relative standard deviations (RSDs) are of the order of 5–10% for this hyphenated technique. The designs studied include slotted tube, single silica tube, and integrated atom trap water-cooled atom traps. The accuracy of this method was tested by analyses of BCS-CRM No.346 (Alloy), GBW 07302 (Stream Sediment), PACS-1 (Marine Sediment), NBS SRM 1633a (Coal Fly Ash), and NIST SRM 1643e (Trace Element in Water) certified reference materials. Agreement between analytical results and certified values for the test elements Ge and Sn (in the range of 1.7–91.0 µg g−1) were in agreement with recommended values. The measured Ge and Sn contents in five referenced materials were in satisfactory agreement with the certified values. The hyphenated technique was applied for germanium and tin determination in coal fly ash, soil, sediment, garlic, sewage, and river water.

Studies of matrix modifiers in the determination of tin by GFAAS

Direct determination of tin in whole blood and urine by GF AAS

Determination of trace amounts of tin by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine

Investigation of Tin Penetration at Bottom Surface of Float Borosilicate Glasses

The Determination of Trace Amounts of Tin by Flow-Injection Hydride Generation Atomic-Absorption Spectrometry with On-Line Ion-Exchange Separation and Preconcentration.

Investigation of Organic Phase Chemical Vapor Generation-Atomic Fluorescence Spectrometry in the Determination of Tin

An Investigation of the Local Environments of Tin in Tin-Doped Α-Fe2o3

Enhancement in Intergranular Corrosion Resistance of the Stabilised Ultra-Pure 430LX Ferritic Stainless Steel by Tin Addition

Influence of graphite tube inner shape on analytical property of GFAAS

Evaluation of different permanent modifiers for the determination of arsenic in environmental samples by electrothermal atomic absorption spectrometry

Effect of Intercritical Austenitization and Starting Matrix on Martensite Start Temperature and Austenite Carbon Concentration in Ductile Iron

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

Determination of Trace Tin by Anodic Stripping Voltammetry at A 1-(3-nitrophenyl)-3-(4-phenylazophenyl)triazen Modified Carbon Paste Electrode

Semi-automatic determination of tin in marine materials by continuous flow hydride generation inductively coupled plasma atomic emission spectrometry

Microcalorimetric and Infrared Spectroscopic Studies of .Gamma.-Al2o3 Modified by Basic Metal Oxides

Influence of Ti and V on the Hot Ductility of High Manganese Austenitic Steel

Effect of Tin on Hot Ductility and High-temperature Oxidation Behavior of 20CrMnTi Steel

Effect of Ti/V Ratio on Thermodynamics and Kinetics of MC in Γ/α Matrices of Ti–V Microalloyed Steels

Effects of Small Additions of Tin on High-Temperature Oxidation of Fe-Cu-Sn Alloys for Surface Hot Shortness

Microstructures and Transformation Characteristics of Thin Films of Tinicu Shape Memory Alloy

Effect of Tin on the Corrosion Resistance of 16 Cr Ferritic Stainless Steel in Acidic Solution and Chloride-Containing Media